Matrox MXO2 Installation And User Manual page 107

Matrox Uncompressed SD
$
uncompressed SD format.
Matrox Uncompressed SD + Alpha
$
uncompressed SD format with alpha.
¡ Important To export to NTSC or 486p format using a Matrox
Uncompressed SD codec, you must set the frame size to 720×486 using the
and Height settings on the Video page.
Width
Matrox Uncompressed HD
$
uncompressed HD format.
Matrox Uncompressed HD + Alpha
$
uncompressed HD format with alpha.
If you selected a Matrox codec that requires configuration, click the Codec
7
button. For details, see
Settings
codec" on page 188,
page 188, and
page 189.
From the Frame Rate list under Basic Settings , set the appropriate frame
8
rate for the video format to which you are rendering. For example, if you are
rendering to 1080i @ 29.97 fps format, set the frame rate to 29.97.
From the Source Range list in the Source Panel , select the range you want
9
to export, such as Work Area .
Click Queue to send your export request to Adobe Media Encoder, or click
10
Export to immediately start your export.
For information about other video export settings and using Adobe Media
Encoder, see your Adobe Media Encoder documentation.
Renders video to 8-bit or 10-bit
Renders video to 8-bit or 10-bit
"Configuring the Matrox DVCPRO HD
"Configuring the Matrox Uncompressed codecs"
"Configuring the Matrox MPEG-2 I-frame codecs"
Renders video to 8-bit or 10-bit
Renders video to 8-bit or 10-bit
Exporting to a Matrox .avi file
87
on
on