Installing Matrox Mtx.utils; Hardware Detection - Matrox MXO2 Installation And User Manual

8

Installing Matrox Mtx.utils

Matrox Mtx.utils Setup installs the MXO2 device drivers, and all the software
required to use your MXO2 hardware with supported programs, such as the
Matrox plug-in for Adobe Premiere Pro.
If you plan on using MXO2 with Adobe Premiere Pro and/or Adobe Media
Encoder
Mtx.utils. You should also install any other third-party programs for which you
want to install the Matrox WYSIWYG plug-ins, such as Adobe After Effects,
Adobe Photoshop, and eyeon Fusion.
You can install Matrox Mtx.utils on a computer with or without the MXO2
hardware connected. To download and install the latest version of Matrox
Mtx.utils, visit the MXO2 Support section of our website at
www.matrox.com/video/support. You can also contact your Matrox
representative for the latest software.
¦ Note
Matrox CompressHD card. You can therefore use your Matrox MXO2 hardware
with CompressHD. For details on using CompressHD, see your Matrox
CompressHD Installation and User Guide.

Hardware detection

When you turn on your computer for the first time after connecting and powering
your MXO2 hardware, Windows will detect your new hardware and the "Found
New Hardware Wizard" may appear.
• If you haven't yet installed Matrox Mtx.utils, close the "Found New
Hardware Wizard" by pressing
MXO2 hardware will automatically be installed when you install Mtx.utils.
• If Mtx.utils is already installed on your computer, Windows will either
automatically locate and install your MXO2 drivers, or prompt you to
indicate how you want to search for the drivers. When prompted, choose to
browse for the driver software on your computer. Your MXO2 drivers are
located in the \system\drivers folder where you installed Matrox Mtx.utils
(for example, at C:\Program Files\Matrox Mtx.utils\system\drivers).
1
Chapter 2, Installing Your Matrox MXO2 Hardware and Software
1
, make sure that these programs are installed before installing Matrox
Matrox Mtx.utils Setup installs software for Matrox MXO2 as well as the
Adobe Media Encoder is required to encode Matrox MAX H.264 files using MXO2
products with MAX technology. Many Adobe programs include Adobe Media
Encoder, such as Premiere Pro, After Effects, and Encore.
or clicking Cancel . The drivers for your
ESC