Updating Your Display Card's Drivers; Updating Drivers For Using Dv-1394 Devices - Matrox MXO2 Installation And User Manual

10
¦ Note
Matrox VFW software codecs because Matrox Mtx.utils installs all the Matrox
codecs on your system.
The Matrox VFW software codecs are available for download in the
"Downloads" section of the Matrox Support website at
www.matrox.com/video/support.

Updating your display card's drivers

For the best performance when using your MXO2 system, you should update the
drivers for your display card with the latest drivers available from your display
card's manufacturer. For example, if you're using Adobe Premiere Pro with a
supported NVIDIA display card for GPU acceleration, it's recommended that
you update your system with the latest drivers for your card from NVIDIA.

Updating drivers for using DV-1394 devices

To avoid capture or export to tape issues when using DV-1394 devices with
Matrox MXO2, make sure that all drivers on your system are up to date (card
drivers, chipset and BIOS drivers, etc.), and that you have the latest Windows
updates. If you experience issues using DV-1394 devices, you must change the
1394 host controller driver on your system as follows:
In Control Panel, choose Hardware and Sound > Device Manager .
1
Double-click IEEE 1394 Bus host controllers .
2
3 Right-click the name of your 1394 host controller, and choose Update
Driver Software
When prompted, selected Browse my computer for driver software .
4
5 Select Let me pick from a list of device drivers on my computer .
In the provided dialog box, make sure that Show compatible hardware is
6
selected, and from the list of available device drivers, select 1394 OHCI
Compliant Host Controller (Legacy)
Click Next to install the driver.
7
¡ Important Make sure that your DV-1394 device is turned off when you
connect it to your system, and turn the device on only after Windows has started.
Chapter 2, Installing Your Matrox MXO2 Hardware and Software
If you've installed Matrox Mtx.utils, you do not need to install the
.
.