Matrox MXO2 Installation And User Manual page 105

° To export your sequence to a Matrox .avi file:
Unless you want to export your entire sequence, position the work area bar
1
over the section of the sequence you want to export.
Choose File > Export > Media . This opens the Export Settings dialog
2
box.
From the Format list, select Microsoft AVI .
3
¦ Note The Microsoft AVI format lets you export your sequence using any
Matrox VFW codec. Although the Matrox AVI format is also available, it is
provided only for exporting a 720p sequence to a Matrox .avi file so that you
can export the sequence to a DVCPRO HD device. For details, see
a 720p sequence for export to a DVCPRO HD device"
From the Preset list, select a Matrox preset that matches the video format
4
you want for your exported file. (If you want to export to 486p format, you
can select a Matrox 720×480p preset.)
Select Export Video and Export Audio if you want to export both video
5
and audio.
¦ Note Exported audio will be embedded in your .avi file. Matrox MXO2
does not support audio-only exports to an .avi file.
"Preparing
on page 97.
Exporting to a Matrox .avi file
85