Matrox MXO2 Installation And User Manual page 218

198
¦ Note
will be available.
Click the Video tab to display the settings for your transcoded video.
4
Under Codec , click Configure to select your Matrox MAX H.264 codec
5
settings as explained in
page 200.
Under Video , you can customize the settings that you want for your
6
transcoded video:
$
$
$
$
$
Chapter 14, Using the Matrox MAX H.264 Codec with Adobe Software
Only Matrox presets that are compatible with your project's settings
Frame Size Sets the width and height for your transcoded video.
Frame Rate Sets the frame rate for your transcoded video.
Field Type Indicates the order in which the video fields are displayed,
such as Upper First for interlaced HD video, or Progressive for all
progressive video formats.
Aspect Ratio This is set to 16:9 .
De-interlace video
progressive format (such as 1080i to 720p), select this option to
de-interlace the video for display on a monitor that displays lines
"Specifying your Matrox MAX H.264 settings"
If you're transcoding interlaced video to a
on