Tech. Rep. Mode; Tech. Rep. Mode Menu Screen; Tech. Rep. Mode Function Setting Procedure - Minolta Di350 Service Manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
5

TECH. REP. MODE

• This mode is used by the Tech. Rep. to set, check, adjust, and/or program various ser-
vice functions.
5-1.

Tech. Rep. Mode Menu Screen

5-2.

Tech. Rep. Mode Function Setting Procedure

<Setting Procedure>
1. Set the copier into the Tech. Rep. mode by the following method:
• With the "Meter Count" screen opened from the Utility menu screen, press the following
keys in this order:
Stop Key
2. Select the particular Tech. Rep. mode function to be set.
3. Make the necessary settings according to the function selected.
The function selected is highlighted.
<Exiting the Mode>
• Touch [Exit] on the screen to go back to the Basic screen.
0 0
S-16
Stop Key
1171S005CA
0 1