User's Choice Mode; User's Choice Selection Screen; User's Choice Function Setting Procedure - Minolta Di350 Service Manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
4

USER'S CHOICE MODE

• The User's Choice mode is used to make various settings according to the user's needs.
4-1.

User's Choice Selection Screen

4-2.

User's Choice Function Setting Procedure

<Setting Procedure>
1. Press the Utility key on the control panel and then touch the "User's Choice" key.
2. Select the page number key that contains the desired function from among 1/5 through
5/5 shown at the bottom of the Touch Panel.
3. Select the function to be set and make settings as required.
4. After the settings are complete, touch the "Enter" key to validate the settings.
The function selected is highlighted.
<Exiting the Mode>
• Touch [Exit] on the screen to go back to the Basic screen.
S-9
1167S009CB