Registration (Ir - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09

(7) Registration (IR)

1. CD
Requirement
Specification
10 ±2.0 mm
NOTE
This adjustment must be made when the PH Unit has been replaced and after the adjust-
ments of Registration (CD and FD) (Printer) and CD of Zoom Adjust (IR) have been made.
Adjustment Procedure
1. After the adjustments of Registration (CD and FD) (Printer) and CD of Zoom Adjust (IR)
have been completed, produce a test pattern. (For details, see 3-4. TEST PRINT.)
2. Place the test pattern output on the Original Glass and make a copy of it.
3. Check to see if width A on the test pattern copy meets the specifications.
If width A falls outside the specified range, perform these steps to make the adjustment.
Place the test pattern output after the adjustments of
A
Registration (CD and FD) (Printer) have been com-
pleted on the Original Glass and make a copy of it.
Adjust so that width A on the test pattern copy falls
within the following range.
1171D009AA
Adjust Mode
Registration (CD)
D-42
Setting Range
-127 to +127