FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
7-3.
Adjust Mode Function Tree
Adjust
7-4.
Settings in the Adjust Mode
(1) Printer
• This function is used to enter the adjustment values as they relate to the printer.
<Setting Procedure>
1. Touch [Printer] to open the Printer screen.
2. Select the desired subfunction.
Touch Panel
Display
Registration (CD)
Registration (FD)
Printer
IR
Tech. Rep. Mode
Setting (The default is
Adjust registration of the printer in the main scanning direction.
1st Drawer
2nd Drawer
3rd Drawer
4th Drawer
5th Drawer
Duplex
Adjust "Duplex" after adjustments have been completed for all
drawers.
Adjust registration of the printer in the sub-scanning direction.
-19..........................................
Advanced timing
Registration (CD)
Registration (FD)
Registration
Zoom Adjust
Adjust
-4.0mm......................
Advanced timing
.........................................+19
0
S-40
).
Highlighted
..................... +4.0mm
0
Retarded timing
Retarded timing