Minolta Di350 Service Manual page 31

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
D The Start key is pressed.
ON
Polygon Motor
ON
Fusing Cooling Fan Motor
Approx. 6 sec.
E The Synchronizing Roller Sensor is activated.
OFF
Approx.
110 msec.
VSYNC signal ON:
approx. 50 msec. later
F The Synchronizing Roller Sensor is deactivated.
Approx. OFF
130 msec.
OFF
Approx.
170 msec.
ON
Approx.
320 msec.
ON
Laser
ON
Developing bias (DC)
Approx.
100 msec.
Approx.
140 msec.
Paper Take-Up Solenoid
ON
Paper Take-Up Solenoid
ON
Synchronizing Clutch
ON
Developing bias (AC)
Approx.
160 msec.
Synchronizing Clutch
Developing bias (AC)
Image transfer output: - voltage
Approx.
650 msec.
OFF
Laser
ON
Image transfer output: - voltage
Approx.
1.1 sec.
ON
I/C Motor
ON
Main Motor
The Power Unit Cooling Fan Motor turns at full
speed.
The Ozone Fan Motor turns at full speed.
ON
Approx.
700 msec.
ON
Image transfer current value for printing
OFF
I/C Motor
OFF
Approx.
15 min.
M-6
ON
Image transfer current
value for non-printing
timing between sheets of
paper
Paper Take-Up Solenoid
OFF
Approx.
Paper Take-Up
90 msec.
Solenoid
Developing bias (DC)