Initial Mode - Minolta Di350 Service Manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
8

INITIAL MODE

• Initial mode is used to initialize the various service functions.
8-1. Initial Mode Menu Screen
8-2. Initial Mode Function Setting Procedure
<Setting Procedure>
1. Enter the Initial mode by pressing the following keys in this order:
Warm Restart
Switch ON
2. Select the particular Initial mode function to be set.
3. Make the necessary settings by following the instructions given sequentially on the
screen.
The function selected is highlighted.
<Exiting the Mode>
• Touch [Exit] on the Initial mode screen to go back to the Basic screen.
Enter "3" from the 10-Key Pad when "." appears at the center on the
left side of the screen while the start-up screen is being displayed.
S-42
1167S013CB