Winding Of The Scanner Drive Cables - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09

(10) Winding of the Scanner Drive Cables

Pulley F
Pulley E
Cable on Hook End
Pulley H
Pulley G
Pulley B
Front
1. Position the round bead of the Scanner Drive
1167D051AC
2. Wind the hook end of the Scanner Drive Cable two
1167D052AD
3. Wind the bead end of the cable four turns clock-
Cable on
Bead End
NOTE
Make sure that no part of the cable rides on the other.
1167D053AD
Pulley C
Pulley A
Cable in the pulley as shown.
turns counterclockwise from the rear side to the
front.
wise from the front to the rear. Then, secure the
cable with tape.
D-19
Pulley D
1167D047AB