Minolta Di350 Service Manual page 93

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
Touch Panel
Display
Intelligent Sorting
Output Tray
Small ID Original
Scanner Dry
Setting (The default is
When the system is equipped with a finishing option and the ADF is
being used, select whether to turn "ON" or "OFF" the function that
automatically switches between Sort and Non-Sort according to the
number of originals loaded in the ADF.
ON
Select the output tray for each application when the system is
equipped with a Job Tray or Finisher.
<Printer>
• Job Tray
1
• Finisher
1
<Copier>
1
1: 1st tray; 2: 2nd tray
When the system is equipped with a Finisher, the option of "Copier"
and the tray designation keys "1" and "2" are not displayed.
Select whether to enable ("ON") a copy cycle or not ("OFF") when it is
initiated with no original placed on the Original Glass or with an origi-
nal of a small size that is not detectable by the system (smaller than
A5) placed on the Original Glass.
ON
The copy cycle is run using
the paper loaded in the
default paper source.
Set the time-of-day to run a Scanner drying cycle.
Hours
00 ~ 23
When entering a value for Hours and Minutes and if it is a one-digit
number, first enter a "0."
5/5
A warning message is given
and the copier inhibits the
start of this copy cycle.
S-15
).
Highlighted
OFF
2
2
2
OFF
Minutes
00 ~ 59