Minolta Di350 Service Manual page 157

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
3. Snap off one E-ring and remove the Exit Cover.
1171D037AA
4. Unhook one spring to free the Idle Lever.
5. Remove two harnesses.
6. Remove two screws and the Rear Cover.
1171D038AA
7. Remove three screws and the rear Lamp Holder.
1171D039AA
8. Remove one screw and the front Lamp Holder.
9. Remove one screw and the Fusing Roller Heater
Lamp.
1171D041AA
10. Remove two screws and the Fusing Rear Guide
Assy.
11. Remove two pressure springs.
1171D043AA
D-27