Movement Check - Minolta Di350 Service Manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25

(7) Movement Check

• This function runs a specified mechanism to check for operation.
<Setting Procedure>
1. Touch [Movement Check] to open the Movement Check menu screen.
2. Touch the desired subfunction.
Touch Panel
Display
ADF Paper Pas-
sage
Scanner
Exp. Lamp Check
Tech. Rep. Mode
Feeds paper through the ADF in the specified mode to check for cor-
rect operation.
1-sided No Detect 1-sided Mixed Orig
SADF
<Procedure>
1. Select ADF Paper Passage.
2. Touch the desired mode key.
3. Load originals in the ADF.
4. Press the Start key to let the ADF start feeding originals.
Pressing of the Start key temporarily stops the ADF. (Another press
will let the ADF resume the sequence.)
The sequence is completed when there is no more originals in the
ADF; however, it is possible to halt the sequence in mid-operation
by pressing the Stop key.
• Drives the CCD.
• Turns ON the Exposure Lamp.
• Moves the Scanner according to the set value.
Checks for the intensity of the Exposure Lamp light.
Movement Check
Operation
S-30
2-sided