User Mode; 4-L. Functions Available From The User Mode; User Mode Setting Procedure - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
4

USER MODE

• This mode is used to make various settings according to the user's needs.
4-1. Functions Available from the User Mode
No. Function
Mixed Original Detection
0
Lightweight Original
4
Smaller Originals
6
7 Auto Power OFF Disabling
File Margin
9
Priority Paper Size/Source
10
APS/AMS/Manual Priority
12
13 Optimum Exposure Level
Priority Manual Exposure
14
Level
Finishing Mode Priority
15
4-2.

User Mode Setting Procedure

<Setting Procedure>
1. Hold down the Panel Reset key for about 3 seconds to set the copier into the User
mode. ("U" appears on the Zoom Ratio Indicator.)
2. From the 10-Keys, enter the number assigned to the desired function. (The number
entered appears following the letter "U" on the Zoom Ratio Indicator.)
3. Press the Start key. (Then, the current setting for that particular function appears on the
Multi-Copy Display.)
4. Press the Clear key.
5. Make a new setting.
6. Press the Start key to validate the entry of the new setting.
Note
If the setting data entered is outside the specifications, it is not validated and is shown blink-
ing.
<Resetting Procedure>
• Press the Panel Reset key to return to the Basic screen.
No.
Priority Orig.
18
20 Auto clear ON/OFF
21 Energy Saver ON Timing
Auto Clear for Plug-In
23
Counter
Sort/Non-Sort Switching
24
ON/OFF
28 Auto Power OFF Timing
Special Paper Setting
51
(1st Drawer)
Special Paper Setting
52
(2nd Drawer)
Special Paper Setting
53
(3rd Drawer)
Special Paper Setting
54
(4th Drawer)
For 23 cpm Copier only
For 18/23 cpm Copier only
S-10
Function
Copy type