Remote System Access; Direct Inward System Access (Disa); Mobile Phone Extension - iPECS LIP-7024LD User Manual

LIP-7024LD

8. Remote System Access

8.1

Direct Inward System Access (DISA)

DISA (Direct Inward System Access) allows remote users to gain access
to the system's resources. The system will recognize remote user dialed
inputs (call other stations, place calls over CO/IP lines, review voice
mails, etc). Remote users may be required to enter an
Code.
OPERATION
To access system resources remotely:
• Call the system's DISA facility,
• Await answer and dial your authorization code (station number and
password),
• Dial as needed for the desired system resource.
8.2

Mobile Phone Extension

When away from your desk or office you can place and receive iPECS
calls on a registered mobile phone.
Mobile Phone Extension feature and assign the Mobile Phone number.
This feature is only effective with an ISDN CO line.
OPERATION
To register a mobile phone number:
• Press the
• Dial 37,
Dial the mobile phone number,
•
• Press the
To activate a registered mobile phone from the user's station:
• Press the
• Dial 38,
• 1 to activate, 0 to deactivate,
• Press the
To place a call from the mobile extension using the iPECS:
• Dial the ISDN DID number of the station, the system will check the
Caller Id, answer the call and the user will receive intercom dial tone,
• Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
• Dial "*" while on an iPECS call,
• Dial the desired extension, the call is transferred and the mobile
phone returns to idle,
button,
/
TRANS PGM
button.
/
HOLD SAVE
button,
/
TRANS PGM
button.
/
HOLD SAVE
You may need to activate the
４０
User Guide
Authorization