IBM TotalStorage NAS 300 User Reference page 62

48
NAS Gateway 300 User's Reference
same for each UNIX user to be mapped, and the Windows group name and
UNIX group name is the same for each UNIX group to be mapped. Otherwise,
you should configure advanced maps.
7. To configure simple maps, select the Simple maps check box and continue
with Step 8.
To configure advanced maps, clear the Simple maps check box and continue
with Step 9.
8. Under Simple maps, perform the following steps:
a. Select the Windows domain name from the drop-down list. (If your
Windows users are defined locally on the NAS Gateway 300, select the
entry containing the computer name of the NAS Gateway 300, preceded by
two backslash characters ("\\"). Otherwise, select the name of the Windows
domain where the users are defined from the list.)
b. In the NIS domain box, type the NIS domain name. You can also type the
name of a specific NIS server in the NIS server box.
c. Continue with Step 10 on page 49.
9. Under Advanced maps, perform the following steps:
a. Define user mappings as follows:
1) Click Show user maps.
2) Select the Windows domain name from the drop-down list. (If your
Windows users are defined locally on the NAS Gateway 300, select the
entry containing the computer name of the NAS Gateway 300,
preceded by two backslash characters ("\\"). Otherwise, select the
name of the Windows domain where the users are defined from the
list.)
3) In the NIS domain field, type the NIS domain name. You can also type
the name of a specific NIS server in the NIS server field.
4) Click Show Windows Users to display all of the Windows user names
in the Windows domain you selected.
5) Click Show UNIX Users to display all of the UNIX user names in the
NIS domain you selected.
6) Select a Windows user name from the list of Windows user names.
7) Select a UNIX user name to be mapped to the Windows user name
that you specified.
8) Click Add to add the mapping between the UNIX user name and
Windows user name to the list of maps.
9) If multiple Windows user names are mapped to one UNIX user name,
you must select one Windows user name to be the primary user name.
Select the mapping corresponding to the primary user name from the
list of maps, and then click Set Primary.
b. Define group mappings as follows:
1) Click Show group maps.
2) Select the Windows domain name from the drop-down list. (If your
Windows users are defined locally on the NAS Gateway 300, select the
entry containing the computer name of the NAS Gateway 300,
preceded by two backslash characters ("\\"). Otherwise, select the
name of the Windows domain where the users are defined from the
list.)
3) In the NIS domain field, type the NIS domain name. You can also type
the name of a specific NIS server in the NIS server field.
4) Click Show Windows Groups to display all of the Windows group
names in the Windows domain that you selected.
5) Click Show UNIX Groups to display all of the UNIX group names in
the NIS domain that you selected.
6) Select a Windows group name from the list of Windows group names.