Starting Um Services - IBM TotalStorage NAS 300 User Reference

Notes:
1. You must install the optional Java Virtual Machine (VM) support to access a
2. If you reinstall Internet Explorer after installing UM Services, you must reapply
3. If you install UM Services before you install MMC 1.1 (or a later version), you

Starting UM Services

You can use IAACU or Terminal Services Client to configure the network setting
remotely, or you can attach a keyboard and mouse to your appliance and configure
the Network settings using the Windows Control Panel. After you have configured
the network settings for your appliance, you are ready to use UM Services.
To start UM Services:
1. Start a Web browser and then, in the Address or Location field of the browser,
client system running UM Services.
the Microsoft VM update. The UM Services client requires Microsoft VM Build
3165 or later. Download the latest Microsoft VM from www.microsoft.com/java
will not have an icon for MMC in the IBM Universal Manageability Services
section of the Start menu.
type:
http://ip_address:1411
where ip_address is the IP address of the NAS Gateway 300, and then press
Enter.
Or, type:
http://computer_name:1411
where computer_name is the computer name of the NAS Gateway 300. The
computer name is predefined as: IBM5196-xxxxxxx, where xxxxxxx is the serial
number located in the lower right corner of the bezel on the front of the
appliance.
If you have changed the computer name from the predefined value, use that
name instead. A user log in window opens.
Chapter 3. Configuration and administration tools
21