Post Error Codes - IBM TotalStorage NAS 300 User Reference

Table 24. Error symptoms and suggested actions (continued)
A serial device does not work.
Software problem
Symptom
Suspected software problem.
Universal Serial Bus (USB) port problems
Symptom
A USB device does not work.

POST error codes

Note: You must connect a keyboard, mouse, and monitor to your appliance in
Table 25 describes POST error codes and their suggested actions. X can be any
number or letter.
In the following error codes, X can be any number or letter.
Table 25. POST error codes
Error code/symptom
062
101, 102
106
111
114
140
NAS Gateway 300 User's Reference
No corrective action. A serial device is not required for normal functioning.
Part/action
1. To determine if problems are caused by the software, verify that:
v Your engine has the minimum memory needed to use the software. For
memory requirements, see the information that comes with the software.
Note: If you have just installed an adapter or memory, you might have a
memory address conflict.
v The software is designed to operate on your engine.
v Other software works on your engine.
v The software that you are using works on another system.
If you received any error messages when using the software program, see the
information that comes with the software for a description of the messages and
suggested solutions to the problem.
2. If you have verified these items and the problem remains, contact your place of
purchase.
Part/action
No corrective action. A USB device is not required for normal functioning.
order to see error messages. If the engine does not recognize the monitor,
keyboard, and mouse, reboot the engine while they are connected. If a
Remote Supervisor Adapter is used for system management, the logs can be
accessed remotely.
Meaning
Three consecutive startup
failures using the default
configuration.
System and processor error.
System and processor error.
Channel check error.
Adapter read-only memory
error.
Part/action
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
4. Microprocessor.
System board
System board
1. Memory DIMM
2. System board
1. Failing adapter.
2. Run Base System Diagnostics.