Roadmap For Setting Up And Configuring The Nas Gateway 300; Opening Screen Of The Nas Setup Navigator - IBM TotalStorage NAS 300 User Reference

Roadmap for setting up and configuring the NAS Gateway 300

Figure 1. Opening screen of the NAS Setup Navigator
The following roadmap presents the requirements and instructions for setting up
and configuring the NAS Gateway 300. Following these directions and referring to
the appropriate sections of this book will help you in this task.
Prerequisites
A suggestion for first-time users . . .
Your understanding of the NAS Gateway 300 and your ability to use it will be
greatly enhanced if you first proceed to the NAS Setup Navigator tutorial.
The NAS Setup Navigator maps out the initial configuration tasks and leads
you through the tasks in the proper order. The tool detects which NAS
appliance it is running on and adjusts the menu and content appropriately. You
can follow links to more in-depth information and to the configuration panels
used to perform the steps. You can also tailor the instructions to fit your needs
by selecting optional topics. The Navigator not only presents information on
functions and features–such as clustering–but also allows you to enable the
functions and features. To start the NAS Setup Navigator, click on the NAS
Setup Navigator icon on the desktop.
After you have become familiar with the NAS Gateway 300, you can refer to
this book for more details.
v A domain controller must exist on the network and a login ID must be
defined for each node to log on. Each node must join the same domain.
3
Chapter 1. Introduction