IBM TotalStorage NAS 300 User Reference page 155

Table 25. POST error codes (continued)
Error code/symptom
129
151
161
162
163
164
175
176
177, 178
184
185
186
187
188
189
Meaning
Internal cache error.
Real time clock error.
Real time clock battery error.
Device configuration error.
Note: Be sure to load the
default settings and any
additional desired settings;
then, save the configuration.
Real-time clock error.
Memory configuration
changed.
Hardware error.
Computer cover or cable
cover was removed without a
key being used.
Security hardware error.
Power-on password damaged. 1. Run the Configuration/Setup Utility program.
Drive startup sequence
information corrupted.
Security hardware control logic
failed.
VPD serial number not set.
Bad EEPROM CRC #2.
An attempt was made to
access the engine with invalid
passwords.
Part/action
1. Microprocessor
2. Optional microprocessor (if installed)
1. Run Base System Diagnostics.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
System board
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Set serial number in the Configuration/Setup
Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program, and
type the administrator password.
Appendix D. Symptom-to-part index
141