IBM TotalStorage NAS 300 User Reference page 52

not enabled for the domain, the following steps are taken to ensure that the
installation process is completed with the necessary registration of the SRV
resource records:
1. The DNS service is installed on the domain controller and is automatically
2. A text file containing the appropriate DNS resource records for the domain
If you are using a DNS server that supports the SRV resource record but does not
support dynamic updates (such as a UNIX-based DNS server or a Windows NT
Server 4.0 DNS server), you can import the records in Netlogon.dns into the
appropriate primary zone file to manually configure the primary zone on that server
to support Active Directory.
If you are configuring the first node, complete these steps to create the Active
Directory Domain Controller:
10. On the Permissions page, select Permissions compatible only with
11. On the Directory Services Restore Mode Administrator password, type your
12. On the Summary page, review the values; then, click Next and wait for the
13. On the Active Directory Installation Wizard page, click Finish. If prompted,
14. Restart the node.
38
NAS Gateway 300 User's Reference
configured with a zone based on the Active Directory domain.
For example, if the Active Directory domain that you chose for your first domain
in the forest was example.microsoft.com, a zone rooted at the DNS domain
name of example.microsoft.com is added and configured to use the DNS
service on the new domain controller.
controller is created.
The file called Netlogon.dns is created in the %systemroot%\System32\config
folder and contains all the records needed to register the resource records of
the domain controller. Netlogon.dns is used by the Windows 2000 NetLogon
service and to support Active Directory for non-Windows 2000 DNS servers.
1. Start the Active Directory Installation Wizard from the IBM NAS Admin console
by selecting Local Domain Controller Setup in the Cluster Tools folder.
2. Read the first page and click Next.
3. On the Domain Controller Type page, select Domain controller for a new
domain; then click Next.
4. On the Create Tree or Child Domain page, select Create a new domain tree;
then click Next.
5. On the Create or Join Forest page, select Create a new forest of domain
trees; then click Next.
6. On the New Domain Name page, type the full DNS name for the new domain.
Write down this value now; it will be needed later on. Click Next.
7. On the NetBIOS Domain Name page, click Next.
8. On the Database and Log Locations page, click Next to accept the default
values.
9. On the Shared System Volume page, click Next to accept the default value.
Windows 2000 servers; then click Next.
password. Write down this value now; it will be needed later on. Click Next.
Configuring Active Directory process to complete.
defer the system reboot.
®