Setting New Passwords; Managing Ip Access - HP WL520 User Manual

setting new passwords

setting new passwords
setting new passwords setting new passwords
–
SNPMP Read Password, Confirm SNPMP Read Password, Confirm SNPMP Read Password, Confirm SNPMP Read Password, Confirm
password is "public".
–
SNMP Read/Write Password, Confirm SNMP Read/Write Password, Confirm
SNMP Read/Write Password, Confirm SNMP Read/Write Password, Confirm
password is "public".
–
Telnet (CLI) Password, Confirm Telnet (CLI) Password, Confirm Telnet (CLI) Password, Confirm Telnet (CLI) Password, Confirm
password is "public".
–
HTTP (Web) Password, Confirm HTTP (Web) Password, Confirm HTTP (Web) Password, Confirm HTTP (Web) Password, Confirm
password is "public".
NOTE:
For security purposes we recommend changing ALL PASSWORDS from the default "public," immediately.

managing ip access

managing ip access
managing ip access managing ip access
The Management IP Access table is used to specify station(s) that is (are) authorized to manage the HP WL520 device through
available management services (SNMP, HTTP [Web], and Telnet [CLI]). To configure this table, click Add
parameters:
– . Enter the IP Address for the management station.
IP Address IP Address IP Address IP Address
– . Enter a mask that will act as a filter to limit access to a range of IP Addresses.
IP Mask IP Mask IP Mask IP Mask
– . Enter an optional comment such as the station name.
Comment Comment Comment Comment
NOTE:
The IP mask 255.255.255.255 would authorize the single station defined by the IP Address to configure the Access
Point device. The Access Point device would ignore commands from any other IP address. In contrast, the IP mask
255.255.255.0 would authorize an
. Enter each password in both the
. Enter the password in both the
. Enter the password in both the
. Enter the password in both the
ALL L P AL ASSWORDS
ALL PASSWORDS PAS WORDS
anyone e on the subnet shared by the IP Address to configure the Access Point device. anyone on the subnet shared by the IP Address
anyone on the subnet shared by the IP Address yon o th n e subnet shar
Management Settings
field and the
Read Password Read Password Read Password Read Password
field and the
Read Password Read Password
Read Password Read Password
field and the
Read Password Read Password Read Password Read Password Confirm Confirm Confirm Confirm
field and the
Read Password Read Password Read Password Read Password Confirm Confirm Confirm Confirm
S
ed by th e IP Addr s es
field. The default
Confirm Confirm Confirm Confirm
field. The default
Confirm Confirm
Confirm Confirm
field. The default
field. The default
Add and set the following Add Add
4-9