Table of Contents
Advertisement
backup your hp
backup your hp WL5
backup your
hp WL520
WL520 configuration file
20 configuration file
backup your
hp
WL520
1.
Make sure the TFTP server is running and pointing to the directory where you want to save the file.
2.
Open the web interface of the HP WL520 device.
3.
Click on the
Commands
Commands
Commands
Commands
4.
Type in the IP address of your TFTP server.
5.
Type in a descriptive name for your configuration file.
6.
Select the file type as
7.
Click
to upload this information from your HP WL520 unit to the TFTP server, where it can be retrieved in the event
OK
OK
OK
OK
you reset your HP WL520 device to factory defaults at some time.
NOTE:
Record the name of this configuration file and the IP address of the HP WL520 unit so you can easily find it if you
need to download it.
copy a configuration file from another hp
copy a configuration file from another hp
copy a configuration file from another
copy a configuration file from another
You can configure multiple units using the same configuration file by uploading the configuration file from one HP WL520 unit
to the TFTP server, and then download the configuration file to other HP WL520 units.
WARNING:
!
Do not use a static IP address in this c nf g ati n l , otherwise you w l end up w th duplicate IP add e ses in your
network!
1. Check to ensure Dynamic IP address is enabled by clicking the
the Web interface from the HP WL520 unit with the desired configuration and click the
2. Select the
tab and enter the IP address of your TFTP server.
Upload
Upload
Upload
Upload
Fi
Figure 2-8
Figure 2-8
Figure 2-8
gur
e 2-8
Upload Configuration File to TFTP Server
Upload Configuration File to TFTP Server
Upload Configuration File to TFTP Server
Upload Configuration File to TFTP Server
3. Enter the name of your configuration file and click
4. Wait for the file to transfer from the HP WL520 device to the TFTP server.
5. Access the HP WL520 unit to which you will download the configuration. A system window will notify you when this
process is complete. Confirm by clicking
6. Click on the
Commands
Commands
Commands
Commands
7. Verify the IP address of your TFTP server and enter the name of the file you wish to transfer (refer to Step 3).
8. Set the file type to
config
config
config
config
9. The unit will need to be rebooted for the changes to take affect.
10. Repeat this procedure for all the HP WL520 units you want to configure using this specific file.
configuration file
configuration file
button; select the
tab.
Upload
Upload
Upload
Upload
from the pull down menu.
config
config
config
config
hp WL520
hp WL520 un
WL520
WL520
o i ur o
.
OK
OK
OK
OK
.
OK
OK
OK
OK
button, then select the
Download
Download
Download
Download
, and click
. Click
OK
OK
OK
OK
Download
Download
Download
Download
Download the latest software
unit
it
unit
unit
fi
e
il
button and selecting the IPConfig tab. Then open
Configure
Configure
Configure
Configure
tab.
.
i
r s
button.
Commands
Commands
Commands
Commands
2-8
Advertisement
Table of Contents
