Configuring Management Service Interfaces - HP WL520 User Manual

configuring management service interfaces

configuring management service interfaces
configuring management service interfaces configuring management service interfaces
snmp-based management interface bitmask snmp-based management interface bitmask
snmp-based management interface bitmask snmp-based management interface bitmask
Configure the interface or interfaces (Disabled, Ethernet, Wireless-A, Wireless-B, All Interfaces) from which you will manage
the HP WL520 device via SNMP. This parameter can also be used to Disable SNMP-based management.
http-based management interface bitmask http-based management interface bitmask
http-based management interface bitmask http-based management interface bitmask
Configure the HTTP port from which you will manage the HP WL520 device via Web interface.
telnet configuration settings telnet configuration settings
telnet configuration settings telnet configuration settings
Use the Services tab to set the Telnet port, timeout, and session parameters as well as the number of Telnet sessions, password,
and other values.
–
Telnet Server Interface Bitmask Telnet Server Interface Bitmask Telnet Server Interface Bitmask Telnet Server Interface Bitmask
you can manage the HP WL520 device via telnet. This parameter can also be used to Disable telnet management. Reboot
the HP WL520 for this setting to take effect.
– . Enter the Telnet Port. The default port number is 23.
Telnet Port Telnet Port
Telnet Port Telnet Port
–
Login Idle Timeout (seconds) Login Idle Timeout (seconds)
Login Idle Timeout (seconds) Login Idle Timeout (seconds)
terminates the session when it times out.
–
Session Idle Timeout (seconds) Session Idle Timeout (seconds) Session Idle Timeout (seconds) Session Idle Timeout (seconds)
The HP WL520 will terminate the session on timeout.
. Select the interface(s) (Disabled, Ethernet, Wireless A, Wireless B, All Interfaces) from which
. Enter the number of seconds the system will wait for a login attempt. The HP WL520
. Enter the number of seconds the system will wait during a session while there is no activity.
Management Settings
4-10