Ethernet Settings; Set Ethernet Speed And Transmission Mode; Configure Your Management Interfaces - HP WL520 User Manual

ethernet settings

ethernet settings ethernet settings ethernet settings

set ethernet speed and transmission mode

set ethernet speed and transmission mode set ethernet speed and transmission mode set ethernet speed and transmission mode
Figure 2-15 Figure 2-15 Ethernet Interface Ethe et In rf c rn te a e
Figure 2-15 Figure 2-15 Ethernet Interface Ethernet Interface
. Select the desired speed and transmission mode from the pull down menu. Half-duplex means that only one
Configuration Configuration Configuration Configuration
side can broadcast at a time, full-duplex allows both sides to transmit, while auto-duplex selects the best transmission mode for
the given configuration. The recommended setting is
Choose between:
10 Mbit/s - half duplex, full duplex, or auto duplex
100 Mbit/s - half duplex, full duplex, or auto duplex
auto speed - half duplex
auto speed - auto duplex

configure your management interfaces

configure your management interfaces
configure your management interfaces configure your management interfaces
Select which interfaces will be available through the Wireless, Ethernet, and Serial Port interfaces of the HP WL520 unit.
Figure 2-16 Figure 2-16 Management Interface Settings Management Interface Settings
Fi Figure 2-16 gur e 2-16 Management Interface Settings Management Interface Settings
.
auto-speed-auto-duplex auto-speed-auto-duplex auto-speed-auto-duplex auto-speed-auto-duplex
Ethernet Settings
2-16