Introduction - HP WL520 User Manual

Usin U U U sing the command line interface sing the command line interface sing the command line interface g the command line interface
in this chapter in this chapter in this chapter in this chapter

Introduction

– Prerequisite skills and knowledge
– Notation conventions
– Important terminology
– Navigation and special keys
– CLI error messages
Command line interface (CLI) variations
– Bootloader CLI
CLI command types
– Operational CLI commands
– Parameter control commands
Using tables & user strings
– Working with tables
– Using strings
Configuring the hp WL520 unit using CLI commands
– Configuring objects that require reboot
– "set" CLI command
– "show" CLI command
Other network settings
– Set basic configuration parameters using CLI commands
– Configure the hp WL520 device as a DHCP server
– Maintain 802.11b client connections using Link Integrity
– Change your wireless interface settings
– Set interface management services
– RADIUS authentication settings
Parameter tables
introduction introduction
introduction introduction
This document provides details for the Command Line (CLI) Interface used to manage an HP WL520 device. CLI commands
can be used to initialize, configure, and manage network operation of the Access Point.
CLI commands may be entered in real time through a keyboard, or submitted with CLI scripts.
The CLI is available through both the Serial Port Interface and the Ethernet Interface.
NOTE:
All CLI commands and parameters are case-sensitive.
6 6 6 6
6-1