Advanced Filtering - HP WL520 User Manual

advanced filtering

advanced filtering
advanced filtering advanced filtering
– . Select
Enable Proxy ARP Enable Proxy ARP Enable Proxy ARP Enable Proxy ARP
wireless clients. If Disable is selected, the Access Point will bridge ARP requests for wireless clients to the wireless LAN,
unless Disable is selected to prevent proxy ARP. Proxy ARP answers ARP requests for wireless stations without actually
forwarding the (broadcast) ARP request to the wireless network.
– Enable IP/ARP Filtering Enable IP/ARP Filtering . Select
Enable IP/ARP Filtering Enable IP/ARP Filtering
– IP/ARP Filtering Address IP/ARP Filtering Address
IP/ARP Filtering Address IP/ARP Filtering Address
– I P/ARP IP Mask P/ARP IP Mask . Enter the Network Mask IP Address.
P/ARP IP Mask P/ARP IP Mask
The following advanced filtering protocols can filter in the wireless-to-Ethernet direction, the Ethernet-to-wireless direction, or in
both directions. Use the
Status Status Status Status
Deny IPX RIP
Deny IPX SAP
Deny IPX LSP
Deny IP Broadcasts
Deny IP Multicasts
to allow the Access Point to respond to Address Resolution Protocol (ARP) requests for
Enable Enable Enable Enable
Enable Enable to allow filtering, or
Enable Enable
. Enter the Network filtering IP Address.
field to Enable or Disable the filter.
Disable Disable to prevent filtering.
Disable Disable
Setting Filters
4-12