Table of Contents
Advertisement
set system name, location and contact information
set system name, location and contact information
set system name, location and contact information
set system name, location and contact information
Figure 2-3
Figure 2-3
Figure 2-3
Figure 2-3
System Configuration
System Configuration
Sy
System Configuration
stem Configurat n
1.
From the web interface, start by clicking on the
2.
Enter the name of the HP WL520 device, its location within your network or its physical location, such as "Front
Lobby" or Engineering, the name, phone number and e-mail address of the person responsible for this device, and
click
OK
OK
.
OK
OK
set a static ip address for the hp
set a static ip address for the
set a static ip address for the hp WL520 de e vice
set a static ip address for the
1.
Click on the
Network
Network
Network
Network
2.
Then enter a fixed IP Address for your HP WL520 unit, along with the IP mask and default gateway IP Address you
want to use.
NOTE:
The IP Mask of the HP WL520 unit needs to match the IP Mask of your network. If you are setting up the HP WL520
device from a client station, check the IP mask of your computer before proceeding.
3.
Click OK when finished. The HP WL520 unit will need to be rebooted for the changes to take affect.
Figure 2-4
Figure 2-4
Figure 2-4
Figure 2-4
Ne e twork IP Configuration
Network IP Configuration
N twor
Network IP Configuration
k IP
Configurat n
io
Configure
Configure
Configure
Configure
hp WL520
WL520 d vice
hp
WL520
device
device
tab and select the
IP Address Assignment Type
IP Address Assignment Type
IP Address Assignment Type
IP Address Assignment Type
io
Set Basic Configuration Parameters
button, then the
tab.
System
System
System
System
to
.
Static
Static
Static
Static
2-4
Advertisement
Table of Contents
