Radius Authentication Settings - HP WL520 User Manual

add an entry to the mac access control table add an entry to the mac access control table add an entry to the mac access control table add an entry to the mac access control table
1. Click the Add Add button in the MAC Access Control table.
Add Add
2. Enter the MAC Address of the client station authorized to manage this HP WL520 device.
3. Add a comment as needed. Entries are automatically enabled.
disable or delete an entry in the mac access control table disable or delete an entry in the mac access control table disable or delete an entry in the mac access control table disable or delete an entry in the mac access control table
1. Click the Edit button in the MAC Access Control Table.
2. Select the MAC Address you want to disable or delete.
3. Click .
OK OK
OK OK
NOTE:
For larger networks that include multiple HP WL520 devices, you may prefer to maintain this list on a centralized
location using the

radius authentication settings

radius authentication settings radius authentication settings radius authentication settings
Also, if your network includes a RADIUS Server, you can use this tab to define the IP Address of the server that contains a
central list of MAC Address values that identify the authorized stations that may access the wireless network. You must specify
information for at least the Primary RADIUS server. The Backup RADIUS server is optional.
NOTE:
Problems with RADIUS Server configuration or RADIUS Authentication should be referred to the RADIUS Server
developer.
–
Enable RADIUS MAC Access Control Status Enable RADIUS MAC Access Control Status
Enable RADIUS MAC Access Control Status Enable RADIUS MAC Access Control Status
Deselect the check box to prevent use of the RADIUS server.
–
Authorization Lifetime (seconds) Authorization Lifetime (seconds)
Authorization Lifetime (seconds) Authorization Lifetime (seconds)
authenticated. Range is 900 - 43200 sec; default is 900 sec.
–
Enable the Primary or Backup RADIUS Server Enable the Primary or Backup RADIUS Server Enable the Primary or Backup RADIUS Server Enable the Primary or Backup RADIUS Server
– .
IP Address IP Address IP Address IP Address
– .
Destination Port Destination Port
Destination Port Destination Port
– . The password for the user on the RADIUS Server must be the same as the Shared Secret.
Shared Secret Shared Secret
Shared Secret Shared Secret
–
Response time (seconds) Response time (seconds)
Response time (seconds) Response time (seconds)
–
Maximum Retransmissions Maximum Retransmissions
Maximum Retransmissions Maximum Retransmissions
Figure 2-18 Figure 2-18 Security Configuration Screen - RADIUS Authentication Security Configuration Screen - RADIUS Authentication
Fi Figure 2-18 gur e 2-18 Security Configuration Screen - RADIUS Authentication Security Configuration Screen - RADIUS Authentication
RADIUS Authentication Settings.
. Click inside the check box to provide authentication by the RADIUS server.
. Enter the time, in seconds, each client session may be active before being automatically re-
. Click in the desired check box to enable the RADIUS Server.
.
.
Other Security Configuration Settings
2-18