NEC DDXXEE SSeerriieess User Manual page 44

One Touch Serial Operation : it is possible to store the following operations under the second level of a One Touch key:- Serv-
ice codes, digits 0-9, # and *, One Touch keys, Function keys, Pause (MIC key), and key depressions SPK, DND, VOL, HOLD, DC,
FLSH TRFR, CHECK and CLEAR..
- Program a One Touch Serial Operation key, code 1034, under a function key
Then to store the series of operations under the second level of a One Touch key
- Press an idle CL key
- Dial 8 5 2 and press the One Touch key
- Enter the sequence of operations (up to 24 entries)
- Press the One Touch Serial Operation key
- Press the SPK key
To access the second level of the One Touch key
- Press an idle CL key
- Press the One Touch Serial Operation key
- Press the One Touch key
PROGRAMMING ABDIALS†
There are 1000 or 2000 abdial codes (depending on system size) that can be split into common or group codes as necessary.
These may be stored at a key telephone and may be accessed by all key telephone and single line telephone users on the system.
To store an abdial
- Press an idle CL key
- Dial 8 5 3 and the common abdial code or
Dial 8 5 4 and the group abdial code
- Enter the telephone number to be stored (up to 24 digits including #, * and for a pause press the MIC key)
- Press the HOLD key
- To enter a name (up to 10 characters) for the abdial refer to the procedure defined in the Name Storing section
- Press the HOLD key to step on to the next abdial code
- Press the SPK key to complete the entry