NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Telephone
  5. DTL-6DE-1 - DT310 - 6 Button Display Digital...
  6. User manual
NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

Univerge series
Hide thumbs
Table of Contents

Advertisement

Quick Links

NWA-039300-001
ISSUE 4.0
DT730/DT710/DT330/DT310
USER'S GUIDE
NEC Corporation
2010 August

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTL-6DE-1 - DT310 - 6 Button Display Digital Phone and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone

Summary of Contents for NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone

  • Page 1 NWA-039300-001 ISSUE 4.0 DT730/DT710/DT330/DT310 USER’S GUIDE NEC Corporation 2010 August...
  • Page 2 NEC Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Cor- poration and shall not be reproduced without prior written approval from NEC Corporation.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION FACE LAYOUT ................... KEYS AND PARTS ................MENU KEY ..................SIMPLE OPERATION BY MENU KEY AND CURSOR KEY....ICON DISPLAY................... SHORTCUT MENU ................PROGRAMMABLE FEATURE KEYS ..........SOFT KEYS..................CONDITIONS FOR DT700 SERIES ........... 2.INSTALLATION PROCEDURE ADJUSTING ANGLE OF TILT LEG ............
  • Page 4 TABLE OF CONTENTS 4.BASIC OPERATION TO LOGIN ..................TO LOGOUT ..................TO MAKE AN EXTERNAL CALL ............TO MAKE AN INTERNAL CALL ............TO ANSWER AN EXTERNAL CALL ..........101 TO ANSWER AN INTERNAL CALL ........... 103 MULTILINE APPEARANCE..............104 TO HOLD A CALL ................
  • Page 5 TABLE OF CONTENTS TO ANSWER A VOICE CALL HANDS FREE ........133 AUTOMATIC INTERCOM..............133 MANUAL INTERCOM ................. 134 DIAL INTERCOM ................135 CONFERENCE ................. 136 TO ESTABLISH A BROKER CALL............. 136 TO ANSWER A CAMPED-ON CALL ..........136 CALL WAITING - ORIGINATING............137 CALL PARK ..................
  • Page 6 TABLE OF CONTENTS DO NOT DISTURB ................156 CALL REDIRECT ................157 PRIVACY ..................158 PRIVACY RELEASE................159 PHONEBOOK ................... 160 CALL HISTORY ................170 6.DIRECTORY OPERATION TO ADD NEW DATA ................. 175 TO CHANGE GROUP NAME ............182 TO FIND A REGISTERED DATA ............184 TO MAKE A CALL FROM DIRECTORY..........
  • Page 7 TABLE OF CONTENTS TO DELETE ALL DATA ..............222 TO DELETE A SPECIFIC DATA ............223 8.SPECIFICATIONS TECHNICAL SPECIFICATIONS............225 9.MENU LIST MENU LIST FOR DT730 SERIES ............227 MENU LIST FOR DT710 Series ............234 MENU LIST FOR DT330 Series ............237 10.WEB PROGRAMMING OUTLINE ....................
  • Page 8 This page is for your notes.

  • Page 9: Introduction

    NTRODUCTION FACE LAYOUT ITL-8LD-1 (DT730 Series) DTL-8LD-1 (DT330 Series) 179 [mm] 179 [mm] Exit Help Exit Help Scroll Scroll Feautre Feature Recall Feature Recall Answer Answer Menu PQRS WXYZ Menu PQRS WXYZ Redial Redial Speaker Transfer Speaker HOLD HOLD Transfer...
  • Page 10 ITL-32D-1 (DT730 Series) DTL-32D-1 (DT330 Series) 205.8 [mm] 205.8 [mm] Exit Help Exit Help Feature Recall Feature Recall Answer Answer Menu PQRS WXYZ Menu PQRS WXYZ Redial Redial Speaker HOLD Transfer Speaker HOLD Transfer...
  • Page 11 ITL-24D-1 (DT730 Series) DTL-24D-1 (DT330 Series) 179 [mm] 179 [mm] Exit Help Exit Help Feature Feature Recall Recall Answer Answer Menu PQRS WXYZ PQRS WXYZ Menu Redial Redial Transfer Speaker Speaker HOLD Transfer HOLD...
  • Page 12 ITL-12D-1 (DT730 Series) DTL-12D-1 (DT330 Series) 179 [mm] 179 [mm] Exit Help Exit Help Feature Recall Feature Recall Answer Answer Menu PQRS WXYZ PQRS WXYZ Menu Redial Redial Transfer Speaker HOLD Transfer Speaker HOLD...
  • Page 13 ITL-12PA-1 (DT730 Series) DTL-12PA-1 (DT330 Series) 193 [mm] 193 [mm] Exit Help Exit Help Line Line Feature Recall Feature Recall Answer Answer Menu PQRS WXYZ Menu PQRS WXYZ Redial Redial Transfer Speaker HOLD Transfer Speaker HOLD...
  • Page 14 ITL-6DE-1 (DT710 Series) DTL-6DE-1 (DT310 Series) 179 [mm] 179 [mm] Exit Help Exit Help Feature Recall Feature Recall Redial Conf Answer Answer Menu PQRS WXYZ PQRS WXYZ Directory Message Redial Transfer Speaker Speaker HOLD Transfer HOLD...
  • Page 15 ITL-2E-1 (DT710 Series) DTL-2E-1 (DT310 Series) 179 [mm] 179 [mm] Feature Recall Feature Recall Redial Conf Redial Conf Answer Answer PQRS WXYZ Directory Message PQRS WXYZ Directory Message Transfer Speaker HOLD Speaker HOLD Transfer...

  • Page 16: Keys And Parts

    (1) Security Button (DT730 only) KEYS AND PARTS You can prevent information leakage from terminal by simple operation. • KEYS AND PARTS ON ITL-24D-1 (2) Call Indicator Lamp This subsection explains keys and parts of DT Series Lamp at the top corner of DT Series Display taking ITL-24D-1 as an example.
  • Page 17 ber, etc.) to the key (up to 32 digits). Details on Cursor key Volume (UP) key Enter Key * For the assignment of the keys, contact your (4-way Scroll UP key) Telephony Server Administrator. Redial key Directory key ** When two telephone numbers are assigned on (4-way Scroll RIGHT key) (4-way Scroll LEFT key) A side and B side of “One-Touch Speed Dial key”,...
  • Page 18 (16)Hold (d) Enter Press this key to place an internal or external call DT330/DT730 Series has shortcut menu for fre- on hold. quently-used features. Use this key to display the shortcut menu (see SHORTCUT MENU) and determine the selected item in the menu. •...
  • Page 19 Up/Down (only for DTL-2E-1, ITL-2E-1 and DTL-6DE-1) DOWN Used to adjust LCD contrast, speaker/receiver vol- ume, and ringer volume. • LCD Contrast: Press ( ) or ( ) key while idle. • Speaker/Receiver Volume: Press ( ) or ( ) key during conversation. •...
  • Page 20 (c) Page Icon Flashing User Status Icon 8LD display has four pages (8 programmable keys Pattern per page). Page Icon key indicates currently dis- • Call Hold played page. You can switch the programmable (Individual Hold/Individual Hold on key display from page 1 to 4 by using Scroll key. Call Park Group) •...
  • Page 21 Example: Page Turning by Scroll Key Appropriate icons are displayed according to the feature. These displays cannot be changed by Flashing user. Page 1 Key No. 1 RACHEL Key No. 5 LINDA The following shows each LCD indication when Key No. 2 Key No.

  • Page 22: Menu Key

    (3) Scroll Key This key is used to turn over the page of 8LD dis- Menu Item Description play. To view Call History. There are two types of Call History features. On the one hand, the history data is stored in the server History (system) memory.
  • Page 23 Main Menu for DT710 Series Note: DTL-6DE-1/ITL-2E-1/DTL-2E-1 does not have Tool Menu key. Config Note: Unavailable Menu items are grayed out.  Back Menu Item Description - Uses when accessing external XML server. For details, please contact the system Tool administrator.

  • Page 24: Simple Operation By Menu Key And Cursor Key

    SIMPLE OPERATION BY MENU KEY ICON DISPLAY AND CURSOR KEY The LCD of DT730 Series/DT330 Series displays Desktop Icons which provide notification when events Menu By using key and key, DT Series user can (such as missed call and voice mail) occur. access Call History, Directory and terminal settings with simple operation.

  • Page 25: Shortcut Menu

    SHORTCUT MENU Shortcut Menu for DT330 Series As shown in the figure below, DT730 Series/DT330 Series has Shortcut Menu for frequently-used features. Feature Description You can access to Shortcut Menu by pressing key. (Enter) Missed Calls Access to history of Missed Call. Voice Mail Access to history of incoming Voice Mail.
  • Page 26 [Missed] 12/JUL/2010 (MON) 10:00 Ken Kobus 7205  Option Back Note: or soft If two or more records exist, use key to display the next/former records. Note: For unanswered incoming calls, will be dis- played on the left of the name. Note: If you make/answer a call to/from the telephone number which is registered to Personal Directory,...

  • Page 27: Programmable Feature Keys

    PROGRAMMABLE FEATURE KEYS MW-SET: Press key to leave message waiting indication on These are examples of DT Series features available by boss’ station from secretary’s station. pressing the programmable keys. Some features using feature access code may be programmed by the user. MW-OFF: Others must be programmed by the telephone system Press key to cancel message waiting indication on...
  • Page 28 Programmable Feature keys have a built-in Light Emitting Diode (LED) that lights or flashes according to the activity of that Feature key. Function Key Activities Feature + 0 = Side Tone On/Off. (for handset)* Feature + 1 = Turns microphone on or off. Feature + 2 = Adjusts handset receiver volume.* Feature + 3 = Selects ringer tone.* Feature + 4 = Adjusts transmission/receiving volume.*...

  • Page 29: Soft Keys

    SOFT KEYS preassigned station. The Soft Keys on the DT Series provide a set of Default Displays for Each Status functions on the LCD that adapt to the changing state of the telephone. While default Soft Key settings are Default Soft Key settings are provided corresponding to provided, desired functions can be assigned to particular functions.
  • Page 30 The following shows the default display patterns of main features. BUSY FDB (Call Forwarding - Busy Line) BUSY 2000 Permits a call to a busy station to be immediately 4:26 PM MON 12 JUL 2010 forwarded to a predesignated station. >>>...
  • Page 31 MWSET (Message Waiting - Set) Busy Out. Allows a station to set a Message Waiting indication or FLASH (Flash) lamp. Provides the station with a switchhook flash. HOLD (Call Hold) FDN (Call Forward - No Answer) Permits a station user to hold a call in progress and to Permits a call to an unanswered station to be forwarded return to the previously held call.
  • Page 32 RLS (Release Key) VISIT (Survivable Remote MGC) Allows you to release the current call when using the Allows a station to indicate a status: when a user is in headset, without waiting for the party to hang up. remote office, VISIT will be blinking. After recovering the main office, VISIT will return to light.

  • Page 33: Conditions For Dt700 Series

    CONDITIONS FOR DT700 SERIES Note: When pressing and holding Help key, the menu Please note that following terminal settings (by Feature of "Online Monitoring" will be displayed. For Key + Digit Key) cannot be used for DT700 Series. details on Online Monitoring, see ONLINE MONI- TORING in Chapter 10.
  • Page 34 This page is for your notes.

  • Page 35: Adjusting Angle Of Tilt Leg

    NSTALLATION ROCEDURE ADJUSTING ANGLE OF TILT LEG • TO LOWER TILT LEG DT730/710 DT330/310 STEP 1: Turn the telephone set upside down. The angle of the tilt leg can be adjusted in four levels. STEP 2: While lifting the center of the stopper, adjust the tilt leg in the direction of the arrow until you hear it click.

  • Page 36: To Remove Tilt Leg

    TO REMOVE TILT LEG TO ATTACH TILT LEG DT730/710 DT330/310 DT730/710 DT330/310 STEP 1: Turn the telephone set upside down. STEP 1: Turn the telephone set upside down. STEP 2: Lower the tilt leg to first level. STEP 2: Align the hooks (c-h) of the tilt leg over the ap- propriate slots (C-H) of the telephone set.

  • Page 37: Connecting Lan Cable

    CONNECTING LAN CABLE Connector for AC Adapter DT730/710 Telephone STEP 1: Prepare 10 BASE-T/100 BASE-T/TX cables (Straight) for connecting the telephone to net- work device such as HUB, PoE Switch. STEP 2: Connect the telephone to the network device using the LAN cable. Groove AC Adapter Plug STEP 3: Thread the LAN cable through the groove on...

  • Page 38: Connecting Line Cord

    CONNECTING LINE CORD DT330/DT310 Line Cord STEP 1: Insert Line cord plug into Line connector on the back of the telephone set until you hear it click. Line Connector Tilt Leg Telephone Groove Line Cord Line Cord Plug STEP 2: Thread the line cord through the groove on the back of the telephone.

  • Page 39: Installing Directory Card

    INSTALLING DIRECTORY CARD ATTACHING HANDSET DT730/710 DT330/310 DT730/710 DT330/310 A directory card (also known as an abbreviated dialing STEP 1: Insert the coiled cord plug into HANDSET table) can be attached to the telephone sets. The connector on the back of the telephone until directory card can be used to record often dialed you hear it click.

  • Page 40: Installing/Removing Key Set Unit

    INSTALLING/REMOVING KEY SET then push the four corners of the panel until the panel clicks into place. UNIT DT730/710 DT330/310 • TO REMOVE KEY SET UNIT Line Key Panel STEP 1: Insert a tapered rod lightly into the right side of the line key panel/button panel.

  • Page 41: Wall Mounting

    WALL MOUNTING To mount the telephone set on the wall, use the DT730/710 DT330/310 following procedure. A wall mount unit (WM-L UNIT) is used to mount all telephones to the wall. This unit connects to the back STEP 1: Mount the hanger of the handset upside side of the telephone.
  • Page 42 Wall Wall Wall WM-L WM-L UNIT WM-L UNIT Modular Terminal Screws Screws (suppulied) - When attaching WM-L UNIT to the wall plate: STEP 5: Insert the line cord plug (included with the Attach WM-L UNIT to the posts on the wall telephone set) into the modular connector.
  • Page 43 Line Cord Telephone Wall Line Connector Groove WM-L Modular Plug STEP 8: Insert the four tabs on WM-L UNIT in the tab slots on the back of the telephone. Tuck the excess cord into WM-L UNIT. Wall Tab Slots Tabs...
  • Page 44 This page is for your notes.

  • Page 45: Terminal Setup

    ERMINAL ETUP LCD indication for Australia This chapter describes operating procedures for terminal settings by the Up/Down ( HANDSET key, Feature key and Menu key. Various terminal settings such as display, sounds, • TO ADJUST SPEAKER VOLUME password, and language are also available from Menu DT730/710 DT330/310 key.

  • Page 46: Setup With Feature Key

    • TO ADJUST LCD CONTRAST DT730/710 DT330/310 RCV VOL. SMALL 4:26 PM MON 12 JUL 2010 Press Up/Down ( ) key in the on-hook status. STEP 2: Press key to alternate be- Feature tween Large and Small volume. RCV VOL. LARGE 4:26 PM MON 12 JUL 2010...
  • Page 47 Frequency (Hz) Modulation (Hz) Melody 4 Melody 5 Melody 6 Note: Tone number 5, 6, 8~10 (Melody 1, 2, 4~6) will sound continuously.
  • Page 48 • TO ADJUST TRANSMISSION/RECEIV- ING VOLUME HANDS FREE DT330/310 4:26 PM MON 12 JUL 2010 Handset volume can be changed. STEP 1: Press Feature key. The LCD displays • CALL INDICATOR LAMP ON/OFF the current volume. DT730/710 DT330/310 You can choose to turn the call indicator lamp either on T/R VOL.
  • Page 49 To Set/Reset Dynamic Dial Pad When both Dynamic Dial Pad and Preset Dial are activated: STEP 1: Press key. The LCD displays: Feature To Set Dial Mode Direct Dial Pad STEP 1: Every time key are pressed, Feature 4:26 PM MON 12 JUL 2010 Dial Mode switches.

  • Page 50: Setup With Menu Key For Dt700 Series

    SETUP WITH MENU KEY FOR Select an item by either of the following operations. • Highlight an item by using , and then press DT700 SERIES or OK soft key. • Press key. • TO ENABLE/DISABLE OFF-HOOK RINGING DT730/DT710 [Setting] The procedure below shows how to enable/disable Off- User Setting hook ringing.
  • Page 51 or OK soft key. • Press key (DT730) / key (DT710) [Incoming Call] Ring Volume Offhook Ring Headset Ring Ring Tone Illumination Headset Ring Volume  Back STEP 6: To disable/enable the off-hook ringing, select Disable or Enable. Select an item by one of the following operations. •...
  • Page 52 • TO SET RINGING OF HEADSET DT730 [Setting] The procedure below shows how to enable/disable the ringing of headset. User Setting Download STEP 1: While indicating the current time on LCD, Data Backup/Restore press key to open the Menu screen. Menu ...
  • Page 53 [Incoming Call] Ring Volume Offhook Ring Headset Ring Ring Tone Illumination Headset Ring Volume   Back STEP 6: To disable/enable the ringing of headset, se- lect Disable or Enable. Select an item by one of the following operations. • Highlight an item by using , and then press or OK soft key.
  • Page 54 • TO SET RINGER TONE DT730/DT710 The procedure below shows how to change the ringer [Setting] tone for internal call and external call. User Setting Download STEP 1: While indicating the current time on LCD, Data Backup/Restore press key to open the Menu screen. Menu ...
  • Page 55 key. [Incoming Call] For example, press to select Download1. Ring Volume Note: The enabled item is highlighted. Offhook Ring Headset Ring [External Call] Ring Tone Illumination Automatic Headset Ring Volume Tone Type1   Back Tone Type2 Tone Type3 STEP 6: Select External Call when setting the Tone Type4 ringer tone for external calls.
  • Page 56 Frequency (Hz) Note: Terminal settings may not become effective, Menu Item Remarks according as the system settings. For details, contact the System Administrator. Tone Type2 8Hz modulation Note: You can set ringer tone for the telephone set Tone Type3 1400 1100 Door Phone here.
  • Page 57 • TO SET ILLUMINATION PATTERN FOR [Setting] CALL INDICATION LAMP DT730 User Setting The procedure below shows how to set the illumination Download pattern (color of Call Indicator Lamp). Data Backup/Restore  Back STEP 1: While indicating the current time on LCD, press Menu key to open the Menu screen.
  • Page 58 • Press key, and then press or OK soft key. [Incoming Call] Ring Volume [External Call] Offhook Ring Automatic Headset Ring Disable Ring Tone Illumination Green Headset Ring Volume Blue  Back Yellow Purple Light Blue STEP 6: Select External Call when setting the illu- White mination pattern for external calls.
  • Page 59 • TO ENABLE/DISABLE RTP ALARM DT730/DT710 [Setting] The procedure below shows how to enable/disable User Setting RTP alarm. Download Data Backup/Restore STEP 1: While indicating the current time on LCD,  Back press Menu key to open the Menu screen. STEP 4: Select Talk.
  • Page 60 Note: For the setting on the System, contact the Sys- [Talk] tem Administrator. Note: The enabled item is highlighted. RTP Alarm DTMF Tone Key Touch Tone Hold Music Prefix  Back STEP 6: Select Automatic, Disable or able (see the following table). Select an item by either of the following operations.
  • Page 61 • TO ENABLE/DISABLE DTMF TONE DT730/DT710 [Setting] The procedure below shows how to enable/disable User Setting DTMF Tone. Download Data Backup/Restore STEP 1: While indicating the current time on LCD,  Back press Menu key to open the Menu screen. STEP 4: Select Talk.
  • Page 62 Menu Items Descriptions [Talk] Follow the setting on the System. If no setting is made in the Sys- RTP Alarm 0 Automatic tem, the default setting DTMF Tone (DTMF=ON) is applied. Key Touch Tone Follow the setting on the terminal 1 Disable Hold Music (OFF).
  • Page 63 • TO SET KEY TOUCH TONE • Press key. DT730/DT710 The procedure below shows how to set Key Touch [Setting] Tone. Key Touch Tone is a tone generated when the User Setting digit keys are pressed while DT Series is off-hook. Download Data Backup/Restore STEP 1: While indicating the current time on LCD,...
  • Page 64 [Talk] RTP Alarm DTMF Tone Key Touch Tone Hold Music Prefix   Back STEP 6: Select Automatic, No Tone, Tone Voice. Select an item by either of the following operations. • Highlight an item by using , and then press or OK soft key.
  • Page 65 • TO SET MUSIC ON HOLD DT730/DT710 [Setting] The procedure below shows how to set Music on Hold User Setting to be heard by DT Series user. Download Data Backup/Restore STEP 1: While indicating the current time on LCD, press key to open the Menu screen.
  • Page 66 Note: You can preview the designated music on hold. [Talk] When selecting Download, the music on hold file must be downloaded in advance. If there is no RTP Alarm downloaded file, you hear no tone in the preview DTMF Tone function (in actual operating conditions, “Minuet”...
  • Page 67 • TO SET CLOCK FORMAT or OK soft key. DT730/DT710 • Press key. Determines whether time is displayed with a 12-hour or 24-hour clock format. [Setting] User Setting Note: This setting is available for Time Display only. Call Log feature displays the time in 24-hour for- Download mat regardless of this setting (DT730).
  • Page 68 [Time Format] [Display] Automatic Time Format 12 hour Indication Local Volume 24 hour Indication Screen Saver  Back Light Back Font Size Language  Back STEP 6: Make a selection from the following list. Select an item by either of the following operations. •...
  • Page 69 • TO ENABLE/DISABLE VOLUME LEVEL • Press key. DISPLAY DT730/DT710 [Setting] Determines whether or not to display the following User Setting volume levels: handset receiver volume, speaker Download volume, ringer tone volume and LCD contrast. Data Backup/Restore  STEP 1: While indicating the current time on LCD, Back press key to open the Menu screen.
  • Page 70 [Display] Time Format Local Volume Screen Saver Back Light Font Size Language   Back STEP 6: Make a selection from the following list. Select an item by either of the following operations. • Highlight an item by using , and then press or OK soft key.
  • Page 71 • TO SET SCREEN SAVER DT730/DT710 STEP 3: Select User Setting. Screen Saver works after the telephone is idle for a Select an item by either of the following operations. certain period of time. The latest Screen Saver contents • Highlight an item by using , and then press will be displayed from XML server when the Screen or OK soft key.
  • Page 72 STEP 5: Select Screen Saver. • Press key, and then press or OK soft key. Select an item by either of the following operations. • Highlight an item by using , and then press [Screen Saver] or OK soft key. •...
  • Page 73 • TO ENABLE/DISABLE BACKLIGHT DT730 [Setting] User Setting The following explains how to enable/disable the backlights of LCD and digit keys. Download Data Backup/Restore The backlights illuminate (for approximately 10  Back seconds) when you press any key or lifts the handset. STEP 4: Select Display.
  • Page 74 [Display] Time Format Local Volume Screen Saver Back Light Font Size Language   Back STEP 6: Make a selection from the following list. Select an item by either of the following operations. • Highlight an item by using , and then press or OK soft key.
  • Page 75 • TO CHANGE CHARACTER SIZE DT730 [Setting] The following explains how to change the displayed User Setting character size on the LCD. Download Data Backup/Restore STEP 1: While indicating the current time on LCD, press key to open the Menu screen. ...
  • Page 76 [Display] Time Format Local Volume Screen Saver Back Light Font Size Language   Back STEP 6: Select either “Standard(16dot)“ or “Small(12dot)“. Select an item by either of the following operations. • Highlight an item by using , and then press or OK soft key.
  • Page 77 • TO SET A LANGUAGE DT730/DT710 [Setting] The following explains how to set a language to be displayed on LCD. User Setting Download STEP 1: While indicating the current time on LCD, Data Backup/Restore press key to open the Menu screen. Menu ...
  • Page 78 [Language] [Display] Automatic Time Format Japanese Local Volume NEC English Screen Saver Back Light NEC Portuguese NEC Spanish Font Size NEC French Language German  Back Italian Dutch STEP 6: Select a desired language. Norwegian Select an item by either of the following operations.
  • Page 79 • TO CHANGE PASSWORD Select an item by either of the following operations. DT730/DT710 • Highlight an item by using , and then press or OK soft key. To change an existing password, follow the procedure • Press key. below. This password is used for the following occasions.
  • Page 80 [Change Password] [Change Password] Old Pass Old Pass **** New Pass New Pass **** Retry Pass Retry Pass Cancel Cancel Note: The initial password is "0000". When changing Note: A maximum of 32 digits (0-9, * and #) can be set the password for the first time, enter "0000"...
  • Page 81 • TO RESET TELEPHONE SETTINGS [Setting] DT730/DT710 User Setting The following explains how to clear the personal data Download off the telephone. Data Backup/Restore  Back STEP 1: While indicating the current time on LCD, press key to open the Menu screen. Menu STEP 4: Select Setting Reset.
  • Page 82 [Setting Reset] Input a password. Back STEP 6: Press or OK soft key to clear the person- al data of the telephone. [Setting Reset] Are you sure? Back...
  • Page 83 • TO DOWNLOAD A FILE DT730/DT710 [Menu] DT730 Series user can download files for Music on History Hold, Ringer Tone and Directory. When downloading Directory these files, the DT Series needs to be connected to the Tool network that has FTP (TFTP server). Call Func.
  • Page 84 STEP 7: Select FTP Settings. Select an item by either of the following operations. [Download Menu] • Highlight an item by using , and then press Download Files or OK soft key. • Press key. Download Address Protocol [Download Menu] FTP Settings ...
  • Page 85 Note: For details on character entry method, see [User ID] TO INPUT CHARACTERS in chapter 4 Basic Input a user ID. Operation. STEP 12:The display goes back to the FTP Settings Back screen. Select Folder. Select an item by either of the following operations. Note: For details on character entry method, see •...
  • Page 86 the Download Menu screen. [Download Address] [FTP Settings] ‘*‘For‘.‘ User ID Password Back Folder After entering an IP address, press or OK soft  Back key. STEP 15:Select Download Address. STEP 17:The display goes back to the Download Select an item by either of the following operations. Menu screen.
  • Page 87 [Hold Music] [Download Files] Input a file name. Hold Music Ring Tone MOH.wav Directory Cancel Exec  Back File Format Maximum Size Note: DT710 can select 1 Hold Music only. -law 8kHz/s wav. under 32 seconds µ STEP 19:When Ring Tone is selected at STEP 18, - When downloading a file for ringer tone, the the following Ring Tone screen is displayed.
  • Page 88 File Name Directory.csv (Fixed) Download Complete! Code Unicode (UTF-8) When changing the file name, go to the next Exit step (STEP 21). When not changing the file name, go to The display goes back to the Download STEP 22. Files screen by Exit soft key. Note: When the downloading process ends in failure, STEP 21:Press BK soft key once to delete the default...
  • Page 89 • TO BACKUP PERSONAL SETTINGS DT730/DT710 [Menu] History DT730\DT710 Series user can backup personal Directory settings of DT Series to FTP/TFTP server. To back up Tool the setting data, the DT Series needs to be connected Call Func. to the network that has FTP (TFTP server). Setting Note: For details on the FTP/TFTP service, contact the...
  • Page 90 STEP 7: Select FTP Settings. [Backup/Restore] Select an item by either of the following operations. • Highlight an item by using , and then press Data Backup or OK soft key. Data Restore • Press key. Server Address Protocol [Backup/Restore] FTP Settings Data Backup ...
  • Page 91 Note: For details on character entry method, see [User ID] TO INPUT CHARACTERS in chapter 4 Basic Input a user ID. Operation. STEP 12:The display goes back to the FTP Settings Back screen. Select Folder. Select an item by either of the following operations. Note: For details on character entry method, see •...
  • Page 92 STEP 14:The display goes back to the FTP Settings screen. Press or Back soft key to display [Server Address] the Backup/Restore screen. ‘*‘For‘.‘ [FTP Settings] Back User ID After entering an IP address, press Password Folder OK soft key.  Back STEP 17:The display goes back to the Backup/Re- store screen.
  • Page 93 [Data Backup] Upload Complete! Input a folder name. PersonalData.tgz Exit Cancel Exec The display goes back to the Backup/ Note: Do not change the extension of the backup file. Restore screen by Exit soft key. The setting data of the telephone can only be backed up as a.tgz file.
  • Page 94 • TO RESTORE PERSONAL SETTINGS DT730/DT710 [Menu] History DT730/DT710 Series user can restore the personal Directory settings of DT Series. To download the backup file to Tool the telephone, the DT Series needs to be connected to Call Func. the network that has FTP (TFTP server). Setting Note: For details on the FTP/TFTP service, contact the...
  • Page 95 STEP 7: Select FTP Settings. [Backup/Restore] Select an item by either of the following operations. Data Backup • Highlight an item by using , and then press or OK soft key. Data Restore • Press key. Server Address Protocol [Backup/Restore] FTP Settings ...
  • Page 96 Note: For details on character entry method, see [User ID] TO INPUT CHARACTERS in chapter 4 Basic Input a user ID. Operation. STEP 12:The display goes back to the FTP Settings screen. Select Folder. Back Select an item by either of the following operations. •...
  • Page 97 the Backup/Restore screen. [Server Address] [FTP Settings] ‘*‘For‘.‘ User ID Password Back Folder After entering an IP address, press  Back OK soft key. STEP 15:Select Server Address. STEP 17:The display goes back to the Backup/Re- Select an item by either of the following operations. •...
  • Page 98 [Data Restore] Input a folder name. Download Complete! PersonalData.tgz Cancel Exec Exit Note: Do not change the extension (.tgz) of the backup The display goes back to the Backup/ file. If the extension is changed, the file cannot be Restore screen by Exit soft key. restored properly.

  • Page 99: Setup With Menu Key For Dt300 Series

    SETUP WITH MENU KEY FOR [Settings] DT300 SERIES Ring Volume • TO CHANGE RINGER TONE VOLUME Off Hook Ring DT330 Back Light Headset The procedure below shows how to change the volume Peripherals of ringer tone. Back STEP 3: Ring Volume can be set in 13 levels (0 - 12). STEP 1: While indicating the current time on LCD, Menu Adjust the ringer tone volume by using...
  • Page 100 • TO ENABLE/DISABLE OFF-HOOK RINGING DT330 STEP 3: To disable/enable the off-hook ringing, select Disable or Enable. The procedure below shows how to Select an item by either of the following operations. • Highlight an item by using , and then press STEP 1: While indicating the current time on LCD, or OK soft key.
  • Page 101 • TO ENABLE/DISABLE BACKLIGHT [Settings] DT330 Ring Volume The following explains how to enable/disable the Off Hook Ring backlights of LCD and digit keys. Back Light The backlights illuminate (for approximately 10 Headset seconds) when you press any key or lift the handset. Peripherals Back STEP 1: While indicating the current time on LCD,...
  • Page 102 • TO SET RINGING OF HEADSET STEP 3: To disable/enable the ringing of headset, se- DT330 lect Disable or Enable. The procedure below shows how to enable/disable the Select an item by either of the following operations. ringing of headset. •...

  • Page 103: Basic Operation

    ASIC PERATION This chapter describes the following basic operation of DT Series. • TO LOGIN • TO LOGOUT • TO MAKE AN EXTERNAL CALL • TO MAKE AN INTERNAL CALL • TO ANSWER AN EXTERNAL CALL • TO ANSWER AN INTERNAL CALL •...

  • Page 104: To Login

    TO LOGIN TO LOGOUT DT730/710 DT730/710 Note: This feature is only available for DT700 Series. STEP 1: Press the preassigned Logout Feature Key on the terminal. STEP 1: When login mode is activated, the telephone prompts for Login ID and Password. Note: This feature is only available for DT700 Series.

  • Page 105: To Make An External Call

    TO MAKE AN EXTERNAL CALL STEP 3: Dial desired telephone number. DT730/710 DT330/310 (while hearing a ringback tone) When dialed telephone number is registered in Per- Dialed Code + Number sonal Directory, the corresponding name information will be displayed on LCD of DT730 Series while you 9XXXXXXXXX are hearing a ringback tone or are engaged in a con- 1:25 PM...
  • Page 106 • When dialed number is not registered in Personal Direc- tory Dialed Code + Number Elapsed Time 00:05 9XXXXXXXXX >>> Note: My Line is an actual line that is directly associ- ated with station number of the telephone. You can make/answer a call via this line. Usually, My line is seized automatically only by lifting the handset or pressing the Speaker key.

  • Page 107: To Make An Internal Call

    TO MAKE AN INTERNAL CALL Name Information registered Dialed Station Number in Personal Directory DT730/710 DT330/310 When dialed station number is registered in Personal 31314 Directory, the corresponding name information will be MARY HARRIS displayed on LCD of DT730 Series while you are hear- >>>...
  • Page 108 Dialed Station Number 31314 1:25 PM MON 12 JUL 2010 >>> Note: My Line is an actual line that is directly associ- ated with station number of the telephone. You can make/answer a call via this line. Usually, My line is seized automatically only by lifting the handset or pressing the Speaker key.

  • Page 109: To Answer An External Call

    TO ANSWER AN EXTERNAL CALL Trunk Trunk DT730/710 DT330/310 Number Type When calling party telephone number is registered in Personal Directory, the corresponding name informa- 1:25 PM MON 12 JUL 2010 tion will be displayed on LCD of DT730 Series while >>>...
  • Page 110 • When caller ID is not received Elapsed Trunk Trunk Time Number Type 00:05 1:25 PM MON 12 JUL 2010 >>> Note: When an incoming call is terminated to My Line of the telephone, you can usually answer the call only by lifting the handset or pressing the Speaker Key.

  • Page 111: To Answer An Internal Call

    TO ANSWER AN INTERNAL CALL STEP 2: Press Answer key or touch the appropriate Line Key. The following procedure explains how to answer an internal call routed to My Line of the telephone. STEP 3: Lift the handset to answer the call. When calling station number is registered in Personal Directory, the corresponding name information will be (while in a conversation)

  • Page 112: Multiline Appearance

    MULTILINE APPEARANCE TO HOLD A CALL DT730/710 DT330/310 DT730/710 DT330/310 STEP 1: Press key. Held line wink flashes. HOLD To Originate a Call Held Station Number STEP 1: Press the MULTILINE APPEARANCE fea- ture key. 2001 HOLD Speaker STEP 2: Lift handset or press key.

  • Page 113: To Place A Call On Exclusive Hold

    TO PLACE A CALL ON EXCLUSIVE Note: Exclusive Hold excludes any other phone from HOLD DT730/710 DT330/310 picking up your held call. Exclusive Hold shows as a flashing green LED on your phone. The same line on other phones appears as a solid red STEP 1: Press key twice.
  • Page 114 STEP 4: If transferring party hangs up, that station’s number appears in the center of recipient’s display. Transferring station TRANSFER 2000 DDD 3 1:25 PM MON 12 JUL 2010 >>>...

  • Page 115: How To Input Characters

    HOW TO INPUT CHARACTERS DT730 This section explains how to enter characters on the text input screen such as Name or User ID, etc. • Character Entry Mode When entering characters from the telephone set, the following three modes are available: uppercase alphabetic character, lowercase alphabetic character and numeric character.
  • Page 116 To display the Sub Menu screen, press Menu key or Option Soft Key while the text input screen is displayed. Also, the following operations are available from the Sub Menu screen. SubMenu Change-word Word-case Word-width Delete Copy Paste Space Return Overwrite/Insert ...
  • Page 117 • Character Code List <Character Code For English (1/2)> DIGIT CASE 10th 11th 12th 13th SHIFT “ Note [SP] Note: Not available from Firmware version 3.0.0.0 and later...
  • Page 118 <Character Code For English (2/2)> 10th 11th 12th 13th 14th 15th 16th 17th 18th 19th 20th & “ Note2 Note1 21th 22th 23th 24th 25th 26th 27th 28th 29th 30th < > Used as a case shift key. Shifts the characters between alphabetic and numeric. Note1 Note1: key is the same for Russian, Turkish and other Languages.
  • Page 119 <Character Code For Russian> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT ¿ ¡ & Б В Г а б в г Д Е Ё Ж З д е ё ж з И Й К Л и й к л...
  • Page 120 <Character Code For Turkish> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT ¿ ¡ & Ç ç Ğ İ ğ Ö ö Ş Ş Ü ü [SP] Note: key is the same for English. Refer to the <Character Code For English (2/2)>.
  • Page 121 <Character Code For Other Languages> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT ¿ ¡ & À Á Â Ã Ä Å Æ Ç à á â ã ä å æ ç È É Ê Ë è é ê ë...
  • Page 122 <Number Code> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT & ‘ Used as a case shift key. Shifts the characters between alphabetic and numeric. Note: When entering password, “0-9”, “*” and “#” are available. “#” is entered by pressing key.
  • Page 123 • Character Entry Method STEP 3: Press or OK soft key on the Sub Menu to go back to text input screen. As an example of character entry method, the fol- lowing shows how to enter “Ken Kobus”. [Name] Input a name. STEP 1: Press key twice to enter “K”.
  • Page 124 STEP 6: Press Menu key or Option soft key to display STEP 8: Press key twice to enter “K”. SubMenu screen, and then select Word- case to switch the text input mode from low- [Name] ercase to uppercase. Input a name. SubMenu Option Back...
  • Page 125 STEP 10:Press or OK soft key on the Sub Menu to go back to text input screen. [Name] Input a name. Ken K Option Back STEP 11:Enter “obus” by using digit keys. Press key three times to enter “o”. Press key twice to enter “b“.
  • Page 126 • To Overwrite Characters STEP 4: Enter new words over existing characters. In this example, “F” is entered. STEP 1: Place the cursor at the left of the characters to be overwritten. [Name] Input a name. [Name] ABFDE Input a name. Option Back ABCDE...
  • Page 127 • To Copy and Paste Characters STEP 3: Place the cursor at the starting point of the target characters by using and then press Start soft key. STEP 1: While characters which you want to copy are displayed, press key or Option soft Menu key.
  • Page 128 STEP 6: On the Sub Menu screen, select Paste and then press or OK soft key. (or press key.) SubMenu Change-word Word-case Word-width Delete Copy Paste Space Return Overwrite/Insert   Cancel STEP 7: The copied characters “CD” are inserted as follows: [Name] Input a name.

  • Page 129: Security Mode

    SECURITY MODE DT730 Note: To make a call of VOICE CALL is available DT730 Series has the Security key which prevents toward a called party in the Security mode. information leakage from terminal. While the terminal is When a called party activates the Security mode with leaving its MIC to ON, the called locked, Security Lamp lights up.
  • Page 130 STEP 3: When DT730 Series is placed in Security Note: When the password entry ends in failure, the fol- mode, Security Lamp lights red and the lowing error message is issued. In that case, screen saver will be activated. press or OK soft key and then retry.

  • Page 131: Emergency Call

    EMERGENCY CALL DT730 Note: You can make a call to only the predetermined number. When telephone numbers other than the You can make a call to a predetermined emergency predetermined emergency number are dialed, telephone number while the telephone is locked (in the following message appears (after a few sec- onds, the display goes back to "Dial Emergency Security mode).
  • Page 132 This page is for your notes.

  • Page 133: Feature Operation

    EATURE PERATION TO ORIGINATE A CALL USING STEP 2: The dialed number appears on the top of LCD. SELECTIVE DIALING (DYNAMIC DIAL PAD, PRESET Input Dial Number DIAL) 2000 Dynamic Dial Pad DT730/710 DT330/310 Speaker STEP 3: Lift handset or press key.

  • Page 134: To Originate A Call Using Speed Calling

    TO ORIGINATE A CALL USING SPEED STEP 3: Display indicates digits programmed. CALLING Note: To program a hook switch for transfer or feature (ONE-TOUCH SPEED CALLING KEYS) activation, press Recall key as first digit. (! dis- DT730/710 DT330/310 plays on LCD.) Note: To program a pause, press the key as...
  • Page 135 LCD Indication of 8LD Display EUROPEAN CHARACTER (UPPERCASE) DIGIT STEP 1: Press the desired One-Touch Speed Call-  ing key and originate a call.  Registered name will be displayed as follows. H K N Q U For the key to which no name information is registered, the character “SPD”...
  • Page 136 EUROPEAN CHARACTER (LOWERCASE) DIGIT   à è ì ñ ù  á é í ò ú â ê î ó û ã ë ï ô ü ä õ å ö & æ œ ç ø ¿ ¡ Note: The shaded area indicates the characters which cannot be entered.

  • Page 137: To Register Name On One-Touch Speed Calling Key

    (Redial) STEP 3: Enter desired name on the keypad. STEP 2: Press the desired speed calling number. Display indicates the name entered. LNR[ ]/SPD[_ _] –X NEC BNET XXXXXX PICK >>> SET CANCEL CLEAR >>> STEP 4: Press SET to save the name.
  • Page 138 STEP 3: Dial the “Speed Calling – System” access XXXX code and the abbreviated call code. 1:25 PM MON 12 JUL 2010 STEP 4: Press key again. Feature SPEED SET 1:25 PM MON 12 JUL 2010 To Operate From Speed Calling – System STEP 1: Press the “Speed Calling –...

  • Page 139: Account Code

    ACCOUNT CODE FORCED ACCOUNT CODE DT730/710 DT330/310 DT730/710 DT330/310 To Enter Speaker STEP 1: Lift handset or press key, receive dial Speaker STEP 1: Lift handset or press key, receive dial tone. tone. STEP 2: Enter feature access code, receive service STEP 2: Enter feature access code, receive service set tone.

  • Page 140: Voice Call

    Using Soft Key STEP 5: Dial desired number. STEP 1: Lift handset. STEP 6: If an “Authorization Code” is required, caller hears special dial tone. STEP 2: Dial desired station number; VOICE Soft Key appears while station is ringing. STEP 7: Enter “Authorization Code”, or call will be de- nied.

  • Page 141: To Answer A Voice Call Hands Free

    TO ANSWER A VOICE CALL HANDS To Answer FREE STEP 1: AICM key flashes red indicating an incoming DT730/710 DT330/310 intercom call. STEP 1: Receive incoming Voice Call. STEP 2: Press the MIC Soft Key or key. LED Overriding party lights.

  • Page 142: Manual Intercom

    STEP 2: A three-party conference is established. solid green. STEP 4: If called station is engaged in a non-intercom CONF call, the station may press MICM after placing 1:25 PM MON 12 JUL 2010 original caller on hold (with key). HOLD To Bridge Into A Manual Intercom Call MANUAL INTERCOM...

  • Page 143: Dial Intercom

    DIAL INTERCOM To Bridge Into A Dial Intercom Call DT730/710 DT330/310 To Initiate Note: Bridging is an optional feature. Speaker STEP 1: Lift handset or press the key. STEP 1: Press the DICM key, lift handset or press STEP 2: Press DICM key. Speaker key.

  • Page 144: Conference

    CONFERENCE nected. Conf LED goes out. DT730/710 DT330/310 STEP 1: With call in progress, ask party to hold. TO ESTABLISH A BROKER CALL STEP 2: Press key, receive interrupted dial Transfer DT730/710 DT330/310 tone. STEP 1: While engaged in a call and wishing to con- STEP 3: Dial desired number.

  • Page 145: Call Waiting - Originating

    STEP 5: By repeating these steps, it is possible to al- STEP 2: Press CALL WAITING. ternate between calls. Display indicates con- STEP 3: Receive special ringback tone. nected station or trunk at any given time. STEP 4: Call waiting tone is sent to busy station. Trunk Trunk Called station...
  • Page 146 STEP 2: Press CW Soft Key receive call waiting ring- Calling station back tone. number Called station number C WAIT 2001 1:25 PM MON 12 JUL 2010 C WAIT SET 2000 >>> 1:25 PM MON 12 JUL 2010 >>> To Disconnect To Answer A Waiting Call STEP 1: Press key.

  • Page 147: Call Park

    CALL PARK DT730/710 DT330/310 To Retrieve A Parked Call From A Remote Station To Program Call Park Key (On One-Touch Speed Calling Key) STEP 1: Dial “Call Park” local retrieval code. STEP 1: Press Feature key. STEP 2: Station user is connected to parked call. STEP 2: Press One-Touch Speed Calling key.

  • Page 148: Call Pick-Up (Group)

    CALL PICK-UP (GROUP) CALL PICK-UP (DIRECT) DT730/710 DT330/310 DT730/710 DT330/310 To Program Pick-up Direct Key (One- When Station Within Pick-up Group Rings Touch Speed Calling Key) STEP 1: Lift handset. STEP 1: Press key. Feature STEP 2: Press CALL PICK-UP or dial “Call Pick-up” STEP 2: Press One-Touch Speed Calling key.

  • Page 149: Outgoing Trunk Queuing

    OUTGOING TRUNK QUEUING EXECUTIVE OVERRIDE DT730/710 DT330/310 DT730/710 DT330/310 If Trunk Is Busy If Called Station Is Busy STEP 1: Receive Trunk Busy indication. Press CALL STEP 1: Press OVERRIDE. BACK. Call is placed in queue for next avail- STEP 2: Interrupted parties receive warning tone. able trunk.

  • Page 150: Last Number Redial

    CALL FORWARDING - ALL CALLS Note: Override may be programmed by the Telephony Server Admin. for one of the Programmable fea- DT730/710 DT330/310 ture keys, or may be programmed on a One- Touch Speed Calling key by storing the Recall To Set and Override access code.
  • Page 151 STEP 3: “FORWARD SET” is displayed, call forward- ing for all calls is set. FORWARD CANCEL 1:25 PM MON 12 JUL 2010 FORWARD SET 1:25 PM MON 12 JUL 2010 Using Soft Key >>> STEP 1: Press FDA Soft Key. To Verify (Only For Terminal With LCD) STEP 2: Receive service set tone and “FORWARD STEP 1: Press FWD.

  • Page 152: Call Forwarding - Busy Line

    CALL FORWARDING - BUSY LINE ing – Busy Line is set. DT730/710 DT330/310 FORWARD SET To Set 1:25 PM MON 12 JUL 2010 >>> Speaker STEP 1: Press key. Receive dial tone. STEP 2: If setting for another station, press MULTI- To Verify (Only For Terminal With LCD) LINE APPEARANCE.

  • Page 153: Call Forwarding - Don't Answer

    Speaker STEP 3: Press key. Call Forwarding – Busy STEP 5: FWD-NA LED lights (at your station or at the Line is cancelled. DT Series of the multiline station you are set- ting). FORWARD CANCEL Speaker STEP 6: Press key. Call Forwarding – Don’t 1:25 PM MON 12 JUL 2010 Answer is set.

  • Page 154: Logged Out Ip Station - Call Destination

    LOGGED OUT IP STATION - CALL STEP 3: Display indicates the station number calls are forwarded to. DESTINATION DT730 To Set Forwarding station Speaker STEP 1: Lift handset or press key. FORWARD 2000 STEP 2: Press the FDL Key or dial “Logged Out IP 1:25 PM MON 12 JUL 2010 Station –...
  • Page 155 To Verify (Only For Terminal with LCD) STEP 2: Press FDL Soft Key; receive service set tone. STEP 1: Press “Logged Out IP Station – Call Destina- STEP 3: Dial destination station number; receive ser- tion” feature key lit red or press FDL. vice set tone.

  • Page 156: Call Back

    CALL BACK DT730/710 DT330/310 Note: Call Back may be programmed by the Telephony Server Admin. on a Programmable feature key or If Called Station is Busy by the user on a One-Touch Speed Calling key. STEP 1: Press CALL BACK. Receive service set tone. Using Soft Key Called party STEP 1: Press CB Soft Key and receive service set...
  • Page 157 STEP 5: S&R LED lights. Using Soft Key STEP 1: Press S&R. Number is stored in memory. STEP 2: S&R LED lights. To Verify (Only For Terminal With LCD) STEP 1: While idle, press S&R. STEP 2: Display indicates digits sorted. To Repeat Speaker STEP 1: Press...

  • Page 158: To Leave A Message

    TO LEAVE A MESSAGE TO ANSWER A MESSAGE DT730/710 DT330/310 DT730/710 DT330/310 To Display Speaker STEP 1: Press key. Receive dial tone. STEP 1: MSG LED is lit. Station is idle. STEP 2: Dial desired station number. Encounter no STEP 2: Press MSG. answer or busy condition.

  • Page 159: Voice Mail System

    STEP 2: Dial # or while message displays. Mes- – Or – sage is erased. STEP 2: Press key. The Shortcut menu (Enter) screen is displayed on LCD. MESSAGE CANCEL 1:25 PM MON 12 JUL 2010 STEP 3: Select Voice Mail and then press (En- or OK soft key to access ter)

  • Page 160: Paging Transfer

    To Answer (Station B) Calling trunk If Station A remains off hook number STEP 1: Station B dials “Paging” answer code, and TRANSFER DDD 3 1:25 PM MON 12 JUL 2010 they are immediately connected. PAGING Station A Paging 1:25 PM MON 12 JUL 2010 STEP 1: Ask calling party to hold.
  • Page 161 STEP 2: Station A hangs up. Station B and the calling PAGING DDD 3 party are connected. 1:25 PM MON 12 JUL 2010 DDD 3 1:25 PM MON 12 JUL 2010 If Station A hung up STEP 1: Station B dials “Paging” answer code. Station A DT Series rings.

  • Page 162: Boss/Secretary Transfer

    BOSS/SECRETARY TRANSFER BOSS/SECRETARY - MW LAMP CONTROL DT730/710 DT330/310 DT730/710 DT330/310 Secretary To Set MW at Boss’ Station STEP 1: Lift handset, press boss’ ringing line. Ask call- With caller on the line ing party to hold. Speaker STEP 1: Lift handset or press key.

  • Page 163: Boss Secretary Override

    BOSS SECRETARY OVERRIDE Note: The secretary can hang up after taking a mes- DT730/710 DT330/310 sage, and set a message lamp at any time by going off-hook on the boss’ multiline and press- ing the MW-SET key. Example: Station 2000 is boss, Station 2001 is secretary. To Cancel At Boss’...

  • Page 164: Do Not Disturb

    STEP 3: Press BOSS/SEC OVERRIDE. Receive connect to Trunk A. Ringback Tone. STEP 3: Secretary hears reorder tone, hangs up. Boss’ station STEP 4: Boss can alternate between the two parties number by pressing Answer key. C WAIT 2000 1:25 PM MON 12 JUL 2010 Option 3 STEP 1: If boss does not respond to 3 bursts of tone,...

  • Page 165: Call Redirect

    To Cancel CALL REDIRECT DT730/710 DT330/310 STEP 1: Press DND. LED goes out. Example: DND CANCEL DT Series Station A views on the DT Series display 1:25 PM MON 12 JUL 2010 the Station Number or Caller ID of an Incoming Call and immediately redirects the call by pressing a Function Key.

  • Page 166: Privacy

    PRIVACY STEP 2: Station C dials Station A, it rings and displays DT730/710 DT330/310 Station C’s number on the display. While Off-Hook STEP 3: Station A presses the REDIR Soft Key. STEP 1: Press DND. LED lights. STEP 4: REDIRECT is displayed on the LCD, and the STEP 2: Privacy feature prevents interruptions for the call immediately forwards to Station B.

  • Page 167: Privacy Release

    – OR – Note: DND must be programmed by the Telephony Server Admin. on a Programmable feature key. Example: Using Soft Key DT Series Station A requests entrance into Station STEP 1: Press flashing DND Soft Key. B’s call in progress. PRIVACY CANCEL Speaker STEP 1: Station A lifts handset or presses...

  • Page 168: Phonebook

    Up to 24 characters can be registered for each name. • SYSTEM PHONEBOOK To Search And Make A Call Example: To Search For “NEC BNET”. STEP 1: Press Pbook soft key while Station is in Idle state.
  • Page 169 On the Menu screen, select Directory. STEP 3: Enter a name and then press OK soft History key to perform a search. Directory Ex. To enter “NEC”: Tool Press key twice to enter “N”. Back Press key four times to enter “E“.
  • Page 170 34567890123456789 Name: NEC More >>> NEC BNET (Display area) DOWN Name: Suzuki Taro(JapanSumida) Number: 01234567890123456789 STEP 6: The registered Phonebook data for “NEC BNET” appears. From this screen, you can make a call by going off-hook or pressing Speaker key.

  • Page 171: Local Phonebook

    • LOCAL PHONEBOOK To Add New Data Phonebook Example: Local DT Series Station A registers “NEC” as new name and its Telephone Number. STEP 3: Local Phonebook screen appears. Press Add soft key. STEP 1: Press Pbook soft key or (Directory) while Station is in Idle state.
  • Page 172 Note: To delete an entered digit, press or Clr soft key. STEP 3: Enter a name (in this example, “NEC” is en- tered) and then press OK soft key. (If STEP 6: “NEC” and its telephone number has been no appropriate data exists, the message “En- added into Local Phonebook.
  • Page 173 STEP 5: When “NEC BNET” appears, press or OK soft key. Name: NEC NEC BNET DOWN STEP 6: The registered data for “NEC BNET” ap- pears. From this screen, you can make a call by go- Speaker ing off-hook or pressing...

  • Page 174: To Edit An Entry

    To Edit An Entry STEP 5: Enter “use” by using digit keys. After the mod- ification has completed, press OK soft Example: key. To Modify Name “Home” to “House” and Telephone Press key twice to enter “u”. Number “0123456789” to “0123456712”. Press key four times to enter “s“.
  • Page 175 STEP 7: Press Clr soft key twice to erase “89”. STEP 2: Press DEL soft key. Name: House Name: NEC ABIKO Number: 01234567 Number: 0123456789 <<< EDIT STEP 8: Enter “12” by pressing digit keys and then STEP 3: Press...
  • Page 176 Note: More soft key appears in Phonebook data screen STEP 1: Press Pref Soft Key while the target Phone- when the number of characters (name) or digits book data is displayed. (telephone number) are exceeding displayable limit (Up to 17 characters or digits can be displayed at a time).
  • Page 177 Available Characters In Local Phonebook LOWERCASE CHARACTER Digit The following tables show available characters in Local  Code Phonebook. w SP  UPPERCASE CHARACTER Digit  Code à è ì ñ ù T W SP   á é í ò...

  • Page 178: Call History

    CALL HISTORY Series) and then press or OK soft key. DT730/710 DT330/310 (or press key.) There are two types of Call History features. On the one History hand, the history data is stored in the system memory. On the other hand, the history data is stored in the Directory memory of the telephone (see 7.CALL HISTORY...
  • Page 179 STEP 4: If the call history data has name information, To Make A Call With Prefix the name is displayed as follows: STEP 1: Press >>> soft key while the history data to Name :NEC ABIKO which you want to add a prefix. Number :01234531300 More...

  • Page 180: To Delete A Specific Data

    STEP 2: Enter a desired name and then press OK soft 1:03 PM MON 12 JUL 2010 key. 31300 <<< (In this example, “NEC ABIKO” is entered.) Pref Note: If you want to exit Call History, press END soft Add name: key.
  • Page 181 STEP 3: The telephone number stored on the call his- tory is displayed. The telephone number can be changed if necessary. Press OK soft key to add the displayed data to Local Phone- book. Name :NEC ABIKO Number :31300...
  • Page 182 This page is for your notes.

  • Page 183: To Add New Data

    IRECTORY PERATION Press key. The Directory screen (Directory) This chapter explains about Personal Directory function shown at STEP 3 can be directly displayed. of DT730 Series. By using Personal Directory function, Note: Directory feature is available for DT730 Series you can make a call with simple operation. only.
  • Page 184 • Press key. [Menu] [Directory] History Search Directory Edit Tool Group Setting Call Func. Own Number Setting Delete All Presence   Back Favorite Config STEP 5: Select Name.   Back Select an item by either of the following operations. STEP 3: Select Personal.
  • Page 185 name, press or OK soft key. STEP 8: Select a desired group. Select an item by either of the following operations. • Highlight an item by using , and then press [Name] or OK soft key. Input a name. • Press key, and then press or OK soft key.
  • Page 186 or Next soft key. • Press key, and then press or Next soft [Edit] key. In this example, Company is selected. Ken Kobus Colleagues [Category] Tel #1 Company Tel #2 Mobile Tel #3 Voice Mail Tel #4 Home Company Name Others Ring Tone ...
  • Page 187 A maximum of four telephone numbers can be set to an entry. If Enable is selected here, the tele- [Edit] phone number which is being edited will be given top priority. In that case, the telephone number is Ken Kobus automatically selected when you make a call with- Colleagues out specifying a specific telephone number.
  • Page 188 STEP 15:The display goes back to the Edit screen. Se- lect Ring Tone. [Ring Tone] Select an item by either of the following operations. Automatic • Highlight an item by using , and then press Default or OK soft key. •...
  • Page 189 [Illumination] [Edit] Automatic Ken Kobus Colleagues Default Disable 31300 Tel #2 Tel #3 Green Yellow Tel #4 Blue Light Blue Automatic Purple Illumination White Rotation Back Save  Back STEP 18:Select a desired color of the Call Indication Note: You can set illumination type for calls routed to lamp.

  • Page 190: To Change Group Name

    STEP 19:The display goes back to the Edit screen. Check the memory number assigned to the [Memory ID] directory data being edited. Input a memory number. 0-499 [Edit] Back Ken Kobus STEP 21:When the display goes back to the Edit Colleagues screen, press Save soft key to save the as- 31300...
  • Page 191 Setting. Select an item by either of the following operations. [Group] • Highlight an item by using , and then press Default or OK soft key. • Press key. Colleagues VIPs [Directory] Family Search Friends Edit Group 6 Group Setting Group 20 Own Number ...

  • Page 192: To Find A Registered Data

    STEP 2: Select Search on the Directory screen. Select an item by either of the following operations. [Group Name Set] • Highlight an item by using , and then press Input a group name. or OK soft key. • Press key.
  • Page 193 STEP 4: Select a target group. Note: If no entry is set to the selected group, "No data" In this example, Colleagues is selected. is issued. Select an item by either of the following operations. • Highlight an item by using , and then press STEP 6: To display the detailed data for a specific or OK soft key.
  • Page 194 • To Search by Name STEP 4: Enter a target name. After entering the name, Press or OK soft key. STEP 1: Open the Directory screen (see TO ADD DATA). [Name] STEP 2: Select Search. Input a name. Select an item by either of the following operations. •...
  • Page 195 [Directory] [Detail] Abe Ichiro Abe Kentaro Abe Kentaro Colleagues Abe Sabro 31300 Detail Option Back Call 0800XXXXXX Tel #3 STEP 6: To display the detailed data for a specific Tel #4 name, press Detail soft key while the name is highlighted.
  • Page 196 • To Search by Telephone Number After entering the number, press or OK soft key. STEP 1: Open the Directory screen (see TO ADD DATA). [Tel Number] STEP 2: Select Search. Input a Telephone number. Select an item by either of the following operations. •...
  • Page 197 STEP 6: To display the detailed data for a specific name, press Detail soft key while the name is highlighted. Note: If two or more telephone numbers are assigned to an entry, a top priority telephone number is automatically selected when the Detail screen appears.
  • Page 198 • To Search by Memory ID STEP 4: Select Memory ID. Select an item by either of the following operations. STEP 1: Open the Directory screen (see TO ADD • Highlight an item by using , and then press DATA). or OK soft key.
  • Page 199 phone numbers are assigned to an entry, a top priority telephone number will be dialed. [Detail] Abe Kentaro [Directory] Colleagues Abe Kentaro 31300 Abe Sabro 0800XXXXXX Tel #3 Detail Option Back Call Tel #4 Note: If no data exists in Directory, "No data" is issued on the screen.
  • Page 200 • To Search by Category STEP 4: Select Category. Select an item by one of the following operations. STEP 1: Open the Directory screen (see TO ADD • Highlight an item by using , and then press DATA). or OK soft key. •...
  • Page 201 phone numbers are assigned to an entry, a top priority telephone number will be dialed. [Detail] Abe Kentaro [Directory] Colleagues Abe Kentaro 31300 Abe Sabro 0800XXXXXX Abe Taro Tel #3 Detail Option Back Call Tel #4 Note: If there is no entry corresponding to the selected category, "No data"...
  • Page 202 • To Search by Company Name STEP 4: Select Company. Select an item by either of the following operations. STEP 1: Open the Directory screen (see TO ADD • Highlight an item by using , and then press DATA). or OK soft key. •...
  • Page 203 [Detail] STEP 6: Select a target name by pressing In the following Directory (Name List) screen, Abe Kentaro you can make a call to the selected party by Colleagues pressing or Call soft key. If two or more tele- 31300 phone numbers are assigned to an entry, a top 0800XXXXXX priority telephone number will be dialed.
  • Page 204 • To Search by Alphabet STEP 4: Select Alphabet. Select an item by either of the following operations. STEP 1: Open the Directory screen (see TO ADD • Highlight an item by using , and then press DATA). or OK soft key. •...
  • Page 205 Note: If there is no entry corresponding to the group of [Alphabet] alphabets, "No data" is issued on the screen. STEP 7: To display the detailed data for a specific name, press Detail soft key while the name is highlighted. PQRS Note: If two or more telephone numbers are assigned...

  • Page 206: To Make A Call From Directory

    TO MAKE A CALL FROM DIRECTORY Note: If multiple telephone numbers are registered to a DT730 target party, a call is made to the first priority tele- phone number. Note: While Directory screen is being displayed, you • To Make a Call from Detail Screen cannot make a call by dialing a telephone num- ber.

  • Page 207: To Add Prefix To Number

    • Press key. [Detail] [Menu] Abe Kentaro History Colleagues Directory 31300 Tool 0800XXXXXXXX Call Func. Tel #3 Setting Tel #4 Presence Favorite Automatic Config Automatic   Back   Call Back STEP 3: Select User Setting. Select an item by either of the following operations. •...
  • Page 208 [Prefix] [Incoming Call] Prefix 1 Incoming Call Talk Prefix 2 Prefix 3 Display  Back Change Password Security STEP 7: Enter a prefix by using the digit keys. Peripherals Setting Reset After entering the prefix, press or OK soft key. Config ...

  • Page 209: To Edit Directory Data

    • To Add Prefix When Making A Call SubMenu STEP 1: Display the Name List screen for a target Prefix party (see TO FIND A REGISTERED DATA). Delete One Delete All [Directory] Edit Abe Ichiro   Cancel Abe Jiro Abe Kentaro STEP 4: Predetermined prefixes are displayed.

  • Page 210: To Delete All Data

    OK soft key. • Press key. STEP 4: On the Edit screen, the detailed data for the selected name is displayed. Modify the nec- essary data by referring to TO ADD NEW DA- After the data modification is complete, press...

  • Page 211: To Delete A Specific Data

    STEP 5: Press or OK soft key. [Directory] Search TO DELETE A SPECIFIC DATA DT730 Edit Group Setting STEP 1: Display the Name List screen for a target Own Number party (see TO FIND A REGISTERED DATA). Delete All  Back [Directory] Abe Ichiro...
  • Page 212 STEP 6: Press or OK soft key. SubMenu Prefix Delete One Delete All Edit   Cancel STEP 4: The following confirmation message appears. Press or OK soft key to delete the appro- priate directory data. [Directory] Delete this entry? Back Note: To cancel the data deletion, press...
  • Page 213 ISTORY PERATION This chapter explains the Call History feature of DT Note: Register call history data to Personal Directory as Series. By using Call History, you can make a call with necessary. Call History data will be cleared when simple operation. powering off the telephone.

  • Page 214: 7.1 For Dt730 Series

    7.1 FOR DT730 SERIES [Menu] TO VIEW CALL HISTORY History DT730 Directory Tool STEP 1: While indicating the current time on LCD, Call Func. press Menu key to open the Menu screen. Setting Presence Note: This feature is available for DT730 Series. DT710 Favorite Series does not support this feature.
  • Page 215 STEP 4: The history data of the last received call is displayed. or soft If two or more records exist, use key to display the next/former records. [Incoming] 12/JUL/2010 (MON) 10:00 Ken Kobus 7205  Option Back Note: For unanswered incoming calls, will be dis- played on the left of the name.

  • Page 216: To Make A Call From Call History

    TO MAKE A CALL FROM CALL HIS- [Incoming] TORY DT730 12/JUL/2010 (MON) 9:58 Abe Kentaro Note: While the history data is displayed, you cannot make a call by dialing a telephone number. Tel: 7207   Option (CASE 1) Back STEP 1: Display call history data of a target telephone STEP 2: On the above screen, press key or Op-...

  • Page 217: To Add Call History Data To Directory

    TO ADD CALL HISTORY DATA TO SubMenu DIRECTORY DT730 Call STEP 1: Display call history data of a target telephone Directory Add number (see TO VIEW CALL HISTORY). Prefix Delete One The following is an example when history data of Delete All an Incoming Call is displayed.
  • Page 218 • Press key, and then press or OK soft key. [Category] Company [Priority Flag] Mobile Disable Voice Mail Enable Home  Prev Others  Back Next STEP 6: The following Edit screen is displayed. “31312” has been registered to Tel #1. Selectable categories are as follows: “TO ADD NEW DATA”...
  • Page 219 Note: If the corresponding data has already stored in the directory, the detailed data (such as name group, etc.) is displayed.

  • Page 220: To Edit Directory Data From Call History

    TO EDIT DIRECTORY DATA FROM SubMenu CALL HISTORY DT730 Call Directory Add STEP 1: Display call history data of a target telephone Prefix number (see TO VIEW CALL HISTORY). Delete One The following is an example when history data of Delete All an Incoming Call is displayed.
  • Page 221 [Directory] [Directory Search] Abe Kentaro Group Kimura Name Ken Kobus Tel Number  Back Others  Back Note: If there is no corresponding data, "No data" will be displayed on LCD. STEP 5: Select a group. STEP 7: Select a registration destination. In this exam- In this example, Colleagues is selected.
  • Page 222 STEP 8: Select a Category to which the telephone number belongs. [Priority Flag] In this example, Company is selected. Disable Select an item by either of the following operations. • Highlight an item by using , and then press Enable or OK soft key.

  • Page 223: To Delete All Data

    TO DELETE ALL DATA DT730 [History] STEP 1: While indicating the current time on LCD, Missed press key to open the Menu screen. Menu Outgoing Incoming STEP 2: Select History. Delete All Select an item by either of the following operations. ...

  • Page 224: To Delete A Specific Data

    TO DELETE A SPECIFIC DATA DT730 SubMenu STEP 1: Display call history data of a target telephone Call number referring to TO VIEW CALL HISTO- Directory Add Prefix The following is an example when a history data of Delete One Incoming Calls is displayed.
  • Page 225 STEP 4: After the appropriate call history data is delet- ed, the display changes as follows. Press or OK soft key. [Incoming] Deleted.

  • Page 226: 7.2 For Dt330 Series

    7.2 FOR DT330 SERIES [Menu] TO VIEW CALL HISTORY Call History DT330 Directory • TO VIEW DATA OF INCOMING CALL/ Settings OUTGOING CALL Back STEP 1: While indicating the current time on LCD, STEP 3: Select a kind of calls. press key to open the Menu screen.
  • Page 227 STEP 4: The history data of the last received call is Note: To go back to name display, press key. For displayed. If name information of the caller the telephone without the cursor key, switching exists, the name is displayed as follows: between “name”...
  • Page 228 • TO VIEW DATA OF MISSED CALL ONLY STEP 3: The history data of the last received call is STEP 1: While indicating the current time on LCD, displayed. If name information of the caller press key to open Shortcut screen. exists, the name is displayed as follows: [Incoming Calls] 10.

  • Page 229: To Make A Call From Call History

    TO MAKE A CALL FROM CALL HIS- TORY DT330 STEP 1: Display the call history data of the target tele- phone number (see TO VIEW CALL HISTO- RY). The following is an example when the history data of an incoming call is displayed. [Incoming Calls] 10.

  • Page 230: To Delete All Data

    TO DELETE ALL DATA STEP 3: Press Del soft key. The display changes as DT330 follows: STEP 1: Select Call History on the Menu screen. [Incoming Calls] Select an item by either of the following operations. Delete All • Highlight an item by using , and then press or OK soft key.

  • Page 231: To Delete A Specific Data

    TO DELETE A SPECIFIC DATA DT330 STEP 1: Display the call history data which you want to delete (see TO VIEW CALL HISTORY). The following is an example when the history data of an incoming call is displayed. [Incoming Calls] 10.
  • Page 232 This page is for your notes.

  • Page 233: Specifications

    PECIFICATIONS TECHNICAL SPECIFICATIONS The following shows the technical specifications of DT 300 Series. Telephone Type 24D/12D 87  43mm, 168  58 dot matrix, 28-digit 4-line 90  28mm, Display (LCD) None 24-digit  3-line * 8LD has two LCDs. Display Color Monochrome (with no shades of gray) Character on LCD...
  • Page 234 The following shows the technical specifications of DT 700 Series. Telephone Type 24D/12D 90  28mm, 87  43mm, 224  96 dot matrix, 28-digit 5-line 168  41 dot matrix, Display (LCD) None * 8LD has two LCDs. 24-digit  3-line Monochrome (with no Display Color Gray scale (with 8 shades of gray)

  • Page 235: Menu List For Dt730 Series

    MENU LIST FOR DT730 SERIES Menu Item Description Menu key while indicating the current time on LCD. Press Menu To view call history data. Also, you can add the history data to the directory. History To access directory feature. There are the following three types of directory Directory features: Personal Directory, Phonebook and Corporate Directory.
  • Page 236 Menu List For History Menu Item Description Default Value 1 History 1 Missed Displays the history of missed calls. You can also make a call from this menu. 2 Outgoing Displays the history of outgoing calls. You can also make a call from this menu. 3 Incoming Displays the history of incoming calls.
  • Page 237 Menu List For Directory Menu Item Description Default Value 2 Directory Directory  From Menu screen, select Personal. 1 Search Search the personal directory. 1 Group Select a group as a search condition. 2 Name Enter the target name and then perform a search. 3 Tel Number Enter the target telephone number and then perform a search.
  • Page 238 Menu Item Description Default Value 3 Group Setting Change a group name. Group Setting Select a desired group name to be changed. 1 Name Enter a new group name. 2 Ring Tone Select a ringer tone type per group. Default (follows terminal set- tings) Note 1...
  • Page 239 Menu List For Setting Menu Item Description Default Value 5 Setting 1 User Setting Make the user setting of DT Series. 1 Incoming Call Settings for incoming call. 1 Ring Volume Not used. 2 Offhook Ring Enable/Disable Off-hook ringing. Enable 3 Headset Ring Enable/Disable the ringing of headset.
  • Page 240 Menu Item Description Default Value 1 Screen Saver Enable/Disable Screen Saver. Disable Mode 2 Wait Time Set the Wait Time to launch Screen Saver 120min 4 Back Light Enable/disable the backlights of LCD and digit keys. Automatic (Enable) 5 Font Size Change the displayed character size on the LCD.
  • Page 241 Menu Item Description Default Value 3 Server Address Enter an IP address of the FTP/TFTP server. 0.0.0.0 4 Protocol Select a protocol of the server (either FTP or TFTP). 5 FTP Settings Set necessary data when using FTP service. 1 User ID Enter a user ID for the data backup via FTP server.

  • Page 242: Menu List For Dt710 Series

    MENU LIST FOR DT710 Series Menu Item Description Menu key while indicating the current time on LCD. Press Menu Not used. Tool To make the user setting of DT Series. Setting To make the configuration setting of DT Series. For details, please contact Config the system administrator.
  • Page 243 Menu List For Setting Menu Item Description Default Value 2 Setting 1 User Setting Make the user setting of DT Series. 1 Incoming Call Settings for incoming call. 1 Offhook Ring Enable/Disable Off-hook ringing. Enable 2 Ring Tone Select a ringer tone for External Call and Internal Call. Automatic Automatic / Tone Type 1~14 (Tone Type1)
  • Page 244 Menu Item Description Default Value 1 Download Files Download the files for Music on Hold, ringer tone and 1 Hold Music Download a file for Music on Hold. MOH.wav 2 Download Address Enter an IP address of the FTP/TFTP server. 0.0.0.0 3 Protocol Select a protocol of the server (either FTP or TFTP).

  • Page 245: Menu List For Dt330 Series

    MENU LIST FOR DT330 Series Menu Item Description Menu Menu key while indicating the current time on LCD. Press To view call history data. Call History PHONEBOOK To access Phonebook feature. For details, see in chapter Directory To make the user setting of DT Series. Settings Menu List For Call History...
  • Page 246 This page is for your notes.

  • Page 247: Web Programming

    ROGRAMMING OUTLINE Web Programming allows you to configure the terminal settings of DT Series from the PC. An Internet browser (Internet Explorer, etc.) is used to access Web Programming. It is not necessary to install any special application software onto the PC. Note: This feature is only available for DT700 Series.

  • Page 248: To Login

    TO LOGIN Follow the steps below to open the Web Programming. Internet browser STEP 1: Start up on the PC. STEP 2: Enter IP address of the target DT700 Series on the address toolbar and then press Enter key. STEP 3: The Web Programming Login screen appears. Enter a user name (type “USER”) and a password (Note 1), then click Note: Enter the same password used when logging into the DT750.
  • Page 249 Note: When the login screen does not appear, check the LAN connection status and entered IP address. If the problem persists, please contact the system administrator. STEP 4: The following Web Programming Home screen appears.

  • Page 250: To Logout

    TO LOGOUT Follow the steps below to exit the Web Programming. Logout STEP 1: Click at the lower left of the screen. STEP 2: The confirmation message appears. Click to log out of Web Programming. Back STEP 3: The display changes as follows. Click...
  • Page 251 STEP 4: After the Web Programming Login screen is displayed, close the Internet browser. Note: Make sure to perform the logout operation after the data setting of the telephone. Note: When 15 minutes have passed leaving the PC without operation after log in to Web Programming, you are forcibly logged out from the Web Programming.

  • Page 252: How To Operate

    HOW TO OPERATE As an example of setting method on the Web Programming, the following explains how to change the ringer tone for external call. Web Programming includes the same menu configuration as "Setting" of DT700 Series terminal. For details on each menu item, see SETUP WITH MENU KEY FOR DT700 SERIES 3.TERMINAL SETUP.
  • Page 253 Printed in Japan 1008-040...

This manual is also suitable for:

Dtl-24d-1 - dt330 - 24 button display digital phoneDt730Dt710Dt330Dt310

Table of Contents

Save PDF