List Of Jigs And Tools; Jigs; Tools; Other - GRAPHTEC CS1000 Service Manual

7. LIST OF JIGS AND TOOLS

7.1 Jigs

Jigs
IS3100 ROM jig
CS1000 system floppy disk
Spacer (BSB-335)
OPS112
(Scanning Master 21+)
Shading paper
CS1000 adjustment test chart
Undesired color line removal
check paper
Fax test chart No. 3
MTF adjustment test chart
Color difference measurement
sample.xls
Color test chart

7.2 Tools

Jigs
Screwdriver
Allen wrench
Needle-nose pliers
Colex gauge
Multimeter

7.3 Other

Other
Water-diluted neutral detergent
or absolute ethanol wiper (cloth)
PC
SCSI card
SCSI cable
CS1000-UM-251-01-9370
Adjustments
•Downloading boot program
•Downloading system program
•Attaching main board to bottom plate, large Hexagonal, 35 mm in length
•Adjusting feed distance
•Adjusting offset
•Aligning sensor images
•Shading (undesired color line removal)
•Shading (undesired gray line removal)
•Used to check resolution
•Checking sensor color density
•Shading
•Replacing main board
•Adjusting feed distance
•Adjusting offset
•Aligning sensor images
•Shading (undesired color line removal)
•Shading (undesired gray line removal)
•Resolution checking
•Checking sensor color density
•Checking sensor color density
Adjustments
Disassembly, reassembly,
and other operations
Adjusting belt tension
Checking voltage level
Adjustments
Cleaning
Used to determine whether the problem
is caused by the scanner or any other
equipment.
7-1
7. LIST OF JIGS AND TOOLS
Remarks
CS1000/EPROM
CS1000.X
Software supplied with the
scanner
IJ-RC-GN (Mitsubishi Paper Mills)
1050 mm x 200 mm
Record measured values between
a and c, b and d, a and b, c and d,
a and d, and b and c.
For checking undesired color or white
lines
For checking undesired gray or black
lines
6-line-pair resolution pattern
Excel file
Red, green, blue, black, white pattern
To be stored in a darkroom
Remarks
Large, medium, and small flatblade
screwdrivers and Phillips screwdrivers
200 g/4 mm displacement
Remarks