Lldp Remote Device; Energy Efficient Ethernet - HP 1810-24G Management And Configuration Manual

Table 30 LLDP Local Device Fields (continued)
Field
Capabilities Enabled
LLDP Interface
Port Description
Port ID
Port ID Subtype
Click the Refresh link above the page to update the page with the latest data from the switch.

LLDP Remote Device

Use the LLDP Remote Device page to view information about remote devices for which the switch
has received LLDP information.
To display the Remote Device page, click LLDP > Remote Device in the navigation pane.
Figure 38 LLDP Remote Device Page
Table 31 LLDP Local Device Fields
Field
Local Interface
Chassis ID
Port ID
Port Description
System Name
System Capabilities
Capabilities Enabled
System IP
Click the Refresh link above the page to re-display the page with current settings from the switch.

Energy Efficient Ethernet

EEE (Energy Efficient Ethernet) is designed to save power by turning off network ports that are not
passing traffic. EEE includes a mechanism to awaken the port when it needs to send or receive
traffic. The transmitter sends LPI (low power idle) signals instead of the normal idle signals to indicate
that the EEE protocol is in effect. After a period of time called Ts (time to sleep), the transmitter
stops sending signals and the link is quiet. When the transmitter needs to send traffic, it begins
52 Link Layer Discovery Protocol (LLDP)
Description
Displays the system capabilities of the local system that are supported and enabled.
The default is Bridge.
LLDP Interface Description
The interface on which LLDP 802.1AB frames can be transmitted.
The description of the selected port associated with the local system.
The source of the port identifier.
Displays the type of the source of the port ID.
Description
The port on the local system that received the LLDP data from the remote system.
The chassis component associated with the remote system.
The physical address of the port on the remote device that sent the LLDP data.
The port description configured on the remote device. If the port description is not
configured, the field is blank.
The system description configured on the remote device. If the system description is not
configured, the field is blank.
The capabilities on the remote device.
The capabilities on the remote device that are enabled.
IP address of the remote device.