Lldp Remote Device Summary - HP 1820 Management And Configuration Manual

Link Layer Discovery Protocol (LLDP and LLDP-MED)

LLDP Remote Device Summary

LLDP Remote Device Summary
Use the LLDP Remote Device Summary page to view information about remote devices for which the switch
has received LLDP information. Interfaces that have this option enabled display in this table only if they have
received LLDP notifications from a remote device.
To display the Remote Device page, click LLDP > Remote Devices in the navigation pane.
Figure 7-4. LLDP Remote Device Summary Page
Table 7-5. LLDP Remote Device Summary Fields
Field
Interface
Remote ID
Chassis ID
Port ID
Port Description
System Name
Capabilities Supported
Capabilities Enabled
System IP
7-6
Description
The HP 1820 interface that received the LLDP data from the remote system.
The identifier assigned to the remote system that sent the LLDPDU.
The hardware platform ID for the remote system.
The physical address of the port on the remote device that sent the LLDP data.
The port description configured on the remote device. If the port description is not
configured, the field is blank.
The system description configured on the remote device. If the system description is not
configured, the field is blank.
The capabilities on the remote device. The possible capabilities include other, repeater,
bridge, WLAN AP, router, telephone, DOCSIS cable device, and station.
The capabilities on the remote device that are enabled.
The reported management IP addresses of the remote device. The system IP address
provides a link to the web interface on the remote device.