Dual Image - HP PS1810 Management And Configuration Manual

Status

Dual Image

Dual Image
The Dual Image status page displays the status of the two software images (image1 and image2) on
the switch. It also provides details about the current active and alternate images, and software image
versions.
To display the Dual Image page, click Status > Dual Image in the navigation bar.
As shown in
reboot.
Figure 2-10. Dual Image Status Page
Table 2-10. Dual Image Status Fields
Field
Active
Next-Active
Image
Version
Description
For instructions on configuring the active image, see
2-16
Figure 2-10, Image1 is the active image and will continue to be the active image after a
Description
The currently active image name.
The next active image name. The administrator can configure the image to take effect
the next time the system is booted. It may be a different than the currently active image
(for example, if the administrator configures the backup image to take effect upon the
next reboot).
The name of the firmware image. The primary image is Image1; the alternate image is
Image2.
The version of the firmware image.
The configured descriptions for the images.
"Dual Image Configuration" on page 10-9.