Panel Operation - Toshiba TOSVERT VF-AS1 Instruction Manual

3.2.2 Panel operation

This section describes how to start/stop the motor, and set the operation frequency with the operating panel.
:Set frequency
:Motor starts
RUN
:Stop the motor
STOP
(deceleration stop)
For coast stop
Change the setting of the
parameter .
Motor
speed
The operation frequency can
be changed anytime even
during operation.
Changing parameter settings
For control panel operation, parameter settings need to be changed in advance.
If you use parameter  that makes it possible to select an operation mode in one operation, you can complete
this operation by just making settings once.
Here are the steps to be followed to change the setting to  (frequency setting and operation by means of the
control panel).
[Setting procedure]
Key operated
EASY
MODE
ENT
ENT
*Pressing the MODE key returns the display to standard monitor mode (displaying operation frequency).
Example of basic connection
MCCB
Power
supply
Coast stop
LED display
Displays the operation frequency (operation stopped). (When

standard monitor display selection = [Output frequency])
Press the EASY key.
 (automatic function setting) at the head of the basic parameters

available in quick mode is displayed.
Press the ENTER key to display the parameter setting (Default

setting:).
Press the

and operation on operation panel).
Press the ENTER key to save the changed parameter.  and the
⇔
parameter are displayed alternately.
C-7
R/L1
S/L2
T/L3
Inverter
RX VI/II RR/S4 PP
CCA
Operation
key to change the parameter to  (Frequency setting
E6581445
Motor
U/T1
IM
V/T2
W/T3
F
ST
Shorted by a
shorting bar
R
when
shipped from
CC
the factory.
3