6.35.2 Setting of optional meter outputs
~ , ~ : Meter output settings
⇒ For details, refer to Instruction Manual (E6581341) specified in Section 6.42.
6.35.3 Calibration of analog outputs
: FM voltage/current output switching
, : FM output gradient characteristic and bias adjustment
, : AM output gradient characteristic and bias adjustment
•Function
Output signals from FM/AM terminals are analog voltage signals. Their standard setting range is from 0 to
10Vdc.
The output current from terminal FM can be changed to 0 to 20mAdc (or 4 to 20mAdc) by changing the settings
of terminal SW2 and a parameter.
[Parameter setting]
Title
Note: To switch to 0-20mAdc (4-20mAdc), set to .
FM terminals setting example
SW2=OFF, = = (%)
(mA)
20
0
SW2=OFF= = = (%)
(mA)
20
0
The analog output inclination can be adjusted using the parameter
For code data 50 to 64, negative inclination is invalid.
Function
FM voltage/current output
switching
FM output gradient
characteristic
FM bias adjustment
AM output gradient
characteristic
AM bias adjustment
0
100%
Internal calculated value
: Large gain
0
100%
Internal calculated value
F-71
Adjustment range
: Voltage 0~10V output
: Current 0~20mA output
: Negative gradient
(descending)
: Positive gradient (ascending)
- . %
: Negative gradient
(descending)
: Positive gradient (ascending)
- . %
SW2=OFF, = = (%)
(mA)
20
4
0
Internal calculated value
SW2=OFF= = =(%)
(mA
20
4
0
Internal calculated value
E6581445
Default setting
6
100%
:Small gain
100%