Toshiba TOSVERT VF-AS1 Instruction Manual page 15

6.38 Integrating wattmeter
6.39 Communication function
6.39.1 2-wire RS485/4-wire RS485
6.39.2 Open network option
6.40 My function
6.41 Traverse function
6.42 Instruction manuals for optionally available devices and special functions
7. Operation with external signal
7.1 External operation
7.2 Applied operation with input and output signals (operation by terminal board)
7.2.1 Functions of input terminals (in case of sink logic)
7.2.2 Functions of output terminals (incase of sink logic)
7.2.3 Setup of input terminal operation time
7.2.4 Analog input filter
7.3 Setup of external speed command (analog signal)
7.3.1 Setup by analog input signals (RR/S4 terminal)
7.3.2 Setup by analog input signals (VI/II terminal)
7.3.3 Setup by analog input signals (RX terminal)
8. Monitoring the operation status
8.1 Screen composition in the status monitor mode
8.2 Monitoring the status
8.2.1 Status monitor under normal conditions
8.2.2 Display of detailed information on a past trip
8.3 Changing status monitor function
8.4 Display of trip information
8.4.1 Trip code display
8.4.2 Monitor display at tripping
8.5 Display of alarm, pre-alarm, etc.
9. Taking measures to satisfy the CE/UL/CSA standards
9.1 How to cope with the CE standard
9.1.1 EMC directive
9.1.2 Measures to satisfy the EMC directive
9.1.3 Low-voltage directive
9.1.4 Measures to be taken to satisfy the low-voltage directive
9.2 Measures to be taken to satisfy the UL/CSA standards
9.2.1 Caution in installing the inverter
9.2.2 Caution in wiring and rated current
9.2.3 Caution as to peripheral devices
9.2.4 Caution as to the protection of motors from overload
10. Selection of peripheral devices
10.1 Selection of wiring materials and devices
10.2 Installation of a magnetic contactor
10.3 Installation of an overload relay
10.4 Application and functions of options
10.5 Optional internal devices
10.6 Connection of a DC power supply and other electric units
10.6.1 Connection of a single-phase 200V power supply
10.6.2 When using the inverter along with a DC power supply
11. Table of parameters
12. Specifications
12.1 Models and their standard specifications
12.2 Outside dimensions and weight
iv
E6581445
F-79
F-80
F-80
F-86
F-86
F-87
F-87
G-1
G-1
G-2
G-2
G-5
G-9
G-9
G-10
G-11
G-12
G-13
H-1
H-1
H-2
H-2
H-5
H-6
H-8
H-8
H-10
H-12
I-1
I-1
I-1
I-2
I-7
I-7
I-8
I-8
I-8
I-8
I-9
J-1
J-1
J-3
J-3
J-4
J-8
J-11
J-11
J-11
K-1
L-1
L-1
L-5