Unfused Image - Xerox Phaser 3600 Service Manual

Print-Quality Troubleshooting

Unfused Image

Initial Actions
5-24
The toner image is not completely fused to the paper. The image easily rubs
off.
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Print Cartridge, PL1.1.34
Fuser Assembly, PL1.4.1
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Procedure Table
Step Actions and Questions
Print a demo page.
1
Does the error still occur when
printing?
Verify the media type selection.
2
Check the paper condition.
3
Is the paper dry, recommended type,
and loaded in the correct position?
Check the Print Cartridge for damages.
4
Is the Print Cartridge damaged?
Example Print
Yes No
Go to step 2. Complete.
Go to step 3. Select the
correct media.
Go to step 4. Replace the
paper.
Go to step 5. Replace the
Print Cartridge.
Phaser 3600 Printer Service Manual
Unfused Image