Transfer Roller (Pl 1.1.7) - Xerox Phaser 3600 Service Manual
Hide thumbs
Also See for Phaser 3600:
- User manual (109 pages) ,
- Instruction (23 pages) ,
- Voluntary product accessibility template (11 pages)
Table of Contents
Advertisement
Transfer Roller (PL 1.1.7)
Phaser 3600 Printer Service Manual
Caution
Do not touch the surface of the Transfer Roller.
1.
Open the Top Cover (page 7-10).
2.
Remove the Print Cartridge and protect it from exposure to light.
3.
Locate the cap on the left side of the Transfer Roller.
4.
Use small needlenose pliers to depress one end of the cap and remove
from the roller.
5.
Pull the tab of the bearing clips on both ends of the Transfer Roller toward
you to release roller tension.
6.
Slide the roller slightly to the right so the end of the shaft clears the lip on
the printer case and lift the Transfer Roller and the Bearing Clips from the
printer.
Caution
Be careful not to drop the separate springs, copper contact, and plastic parts
into the chassis.
Holder
Transfer Roller
Service Parts Disassembly
s3600-055
7-43
Advertisement
Table of Contents
Troubleshooting
