Xerox Phaser 3600 Service Manual page 62

Error Messages
Check Cartridge, Invalid Print Cartridge, Non-Xerox Cartridge
Close Top Cover.
Fuser Failure, Engine Fuser Low Heat Error, Engine Overheat Error
Laser Failure
Outbin Tray is Full
3-12
This message appears when:
A print cartridge is not detected.
A non-Xerox print cartridge is installed.
The Toner Sensor Board is malfunctioning.
This message appears when the:
Top cover is damaged
Sensor or actuator is damaged.
Fuser is damaged or malfunctioning.
The Laser Scan Unit is malfunctioning or damaged.
The Outbin Tray Full Sensor or actuator is malfunctioning or damaged.
Phaser 3600 Printer Service Manual