Printer Specifications; Printer Location And Clearance - Xerox Phaser 3600 Service Manual

General Information

Printer Specifications

Printer Location and Clearance

1-6
Place the printer in a dust-free area where the temperature range is 50
degrees F to 89 degrees F (10 degrees C to 32 degrees C) and the relative
humidity range is between 20% to 80%.
Place the printer in an area where there is adequate space for ventilation,
operation, and servicing. See the clearance graphic below.
Do not block or cover the slots and openings on the printer. The printer
can overheat without adequate ventilation.
For altitudes under 2,050 meters (6,726 feet), use the Low Altitude
setting. For altitudes over 2,050 meters (6,726 feet), use the High Altitude
setting.
Do not place the printer near a heat source.
Do not place the printer in direct sunlight.
Do not place the printer in line with the cold air flow from an air
conditioning system.
Place the printer on a level, solid surface with adequate strength for the
weight of the printer.
1255.6 mm
(49.2 in.)
100 mm
(4 in.)
596 mm
(24.6 in.)
100 mm
(4 in.)
482.6 mm
(18.8 in.)
Phaser 3600 Printer Service Manual
320 mm
(12.6 in.)
s3600-003