Service Safety Summary - Xerox Phaser 3600 Service Manual

Service Safety Summary

General Guidelines and Safety precautions:
Phaser 3600 Printer Service Manual
For qualified service personnel only:
Precautions" on page v.
Avoid servicing alone:
product unless another person capable of rendering first aid or resuscitation is
present.
Use care when servicing with power:
points in this product. To avoid personal injury, do not touch exposed
connections and components while power is On. Disconnect power before
removing the power supply shield or replacing components.
Do not wear jewelry:
other metallic objects could come into contact with dangerous voltages and
currents.
Warning Labels
Read and obey all posted warning labels. Throughout the printer, warning
labels are displayed on potentially dangerous components. As you service the
printer, check to make certain that all warning labels remain in place.
Safety Interlocks
Make sure all covers are in place and all Interlock Switches are functioning
correctly after you have completed a printer service call. If you bypass an
Interlock Switch during a service call, use extreme caution when working on
or around the printer.
Class 1 Laser Product
The Phaser 3600 is certified to comply with Laser Product Performance
Standards set by the U.S. Department of Health and Human Services as a
Class 1 Laser Product. This means that this product does not emit hazardous
laser radiation; which is possible only because the laser beam is totally
enclosed during all modes of customer operation. When servicing the printer
or laser unit, follow the procedures specified in this manual and there will be
no hazards from the laser.
Refer also to the preceding "Power Safety
Do not perform internal service or adjustment of this
Dangerous voltages may exist at several
Remove jewelry prior to servicing. Rings, necklaces, and
vii