Service Parts Disassembly
Tray 2 (PL2.1.0) and Optional Tray 3 (PL2.2.0) Replacement
7-36
Note
If the printer includes the Optional Tray 3, It will be the bottom tray with a
handle. It is identical in appearance to Tray 2 located directly above.
Note
No reconfiguration parameters are required when replacing the Optional
Tray 3.
1.
Remove the defective tray.
2.
Remove the new tray from its plastic packaging and reinsert in the same
slot.
s3600-107
Phaser 3600 Printer Service Manual