Xerox Phaser 3600 Service Manual page 59

Phaser 3600 Printer Service Manual
Diagnostic Menu Map Options
Main Menu Sub Menu
T3 Feed
Motors
Motor
(Cont.)
T4 Feed
Motor
Fuser Fan
Fans
(Test 3)
Fuser Fan
Rdy
SMPS Fan
SMPS Fan
Rdy
Duplex Fan
T1 P-up
Clutches/
Clutch
Solenoids
(Test 4)
T2 P-up
Clutch
T3 P-up
Clutch
T4 P-up
Clutch
Bypass
Clutch
Duplex Sol.
Fuser Bias
Fuser Ctrl
(Test 5)
Temp
Control
Fuser Temp
Inner Temp
Description/Function
The motor will run on the forward
direction or stop.
The motor will run on the forward
direction or stop.
The fan will run or stop.
Check whether the fan is in the
locked state.
The fan will run or stop.
Check whether the fan is in the
locked state.
The fan will run or stop.
The clutch will run or stop.
The clutch will run or stop.
The clutch will run or stop.
The clutch will run or stop.
The clutch will run or stop.
The solenoid will run or stop.
The bias will have the previously
saved value.
The fuser unit will control the power
for fixing and displaying the current
temperature on the panel. The target
temperature is 160 degrees.
The Control Panel displays a digital
equivalent [xxx] of the analog value.
The Control Panel displays a digital
equivalent [xxx] of the analog value.
Error Messages
Control Panel
Display
T3 Feed Motor
[On] [Off]
T4 Feed Motor
[On] [Off]
Fuser Fan
[On] [Off]
Fuser Fan Rdy
[Ready]
[Not Ready]
SMPS Fan
[On] [Off]
SMPS Fan Rdy
[Ready]
[Not Ready]
Duplex Fan
[On] [Off]
T1 P-up Clutch
[On] [Off]
T2 P-up Clutch
[On] [Off]
T3 P-up Clutch
[On] [Off]
T4 P-up Clutch
[On] [Off]
Bypass Clutch
[On] [Off]
Duplex Sol.
[On] [Off]
Fuser Bias
[On] [Off]
Temp Control
[On] [Off] [xxx]
Fuser Temp
[xxx]
Inner Temp
[xxx]
3-9