Outbin Full Sensor (Pl1.3.21) - Xerox Phaser 3600 Service Manual

Service Parts Disassembly

Outbin Full Sensor (PL1.3.21)

7-46
1. Remove the Right Cover (page 7-6).
2. Remove the Left Cover (page 7-7).
3. Remove the Top Cover (page 7-10).
4. Disconnect the 3-wire harness connector (CN3) from the Toner Sensor
Board.
5. Pinch two black mounting tabs from underneath the sensors to release
and remove the sensor.
Phaser 3600 Printer Service Manual
s3600-090