Exit Selecting - ICP Electronics ROCKY-3786EV User Manual

Additionally, when a password is enabled, the user can also
require the BIOS to request a password every time the user's
system is rebooted. This would prevent unauthorized use of the
user's computer.
The user determine when the password is required within the
BIOS Features Setup Menu and its Security option (see Section
3). If the Security option is set to password will be required
both at boot and at entry to Setup. If set to "Setup", prompting
only occurs when trying to enter Setup.

4.15 Exit Selecting

Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing "Y" stores the selections made in the menus in
CMOS – a special section of memory that stays on after
the user turn the user's system off. The next time the
user boot the user's computer, the BIOS configures the
user's system according to the Setup selections stored in
CMOS. After saving the values the system is restarted
again.
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows the user to exit Setup without storing in
CMOS any change.
effect. This exits the Setup utility and restarts the user's
computer.
The previous selections remain in
56