ICP Electronics ROCKY-3786EV User Manual page 63

9. The user's second option, in sequence, will be
whether the user want to flash the user's BIOS. Enter
Y (for "yes").
NOTE: This is the critical step. Once the user kit the enter
key, do NOT touch the keyboard, the reset button,
or power switch while the flashing is in progress.
There will be bar progressing across the screen
while the flashing is progressing.
10. When the flashing process is complete, the user will
be asked to reset or power off the system. Remove
the floppy diskette from the floppy drive and either
hit the reset button or the power button.
11. Reboot the system and note that the BIOS version on
the initial boot-up screen has changed to the new
BIOS version. The user's BIOS upgrade is now
complete.
Recovering The user's Old BIOS:
1. Assuming the user have the floppy made during the
upgrade procedure noted above, boot the system with
that diskette in the floppy drive. If the user do not
have floppy made during the upgrade procedure noted
above, the user will need to repeat steps 1 though 3
(above) for the version of the BIOS the user wish to
recover to.
2. Complete steps 4, 5, 6B, 9, 10, and 11 (above)
substituting the name of the BIOS the user wish to
recover for the upgrade BIOS at step 5.
63